Creating a Digital Cure for Epilepsy
April 24, 2017 | Rice UniversityEstimated reading time: 4 minutes
A team of Rice engineering students recently took top honors and a $5,000 prize for its development of a potential digital cure for epilepsy.
Epilepsy is a neurological disorder characterized by unpredictable, recurrent seizures that can pose a risk to a patient’s safety. When undergoing a seizure, the brain is considered to be in an “ictal” state. Team Ictal Inhibitors‘ goal was to develop a neurostimulator that stimulates the brain to prevent the onset of seizures.
To create the system, the team first needed to develop a seizure-prediction algorithm. The students created a machine-learning algorithm that was “very good” at predicting seizures: It predicted all seizures in their data set at least two minutes before their onset with 3.9 false positives per hour. The team then transferred this prediction algorithm to custom hardware that runs on patient data to predict seizures in real time.
“What our system is trying to do is predict and prevent seizures in real time,” said Sarah Hooper, a senior electrical engineering major. “The first stage of our system is to record neural activity from the brain. That activity is then sent to our piece of hardware, which has the algorithm that produces a seizure prediction. Using the electrical signals that are produced in the brain, we can predict if a seizure is going to occur in the next five minutes or so.”
Hooper said that if a seizure were about to occur, the hardware would then communicate back to electrodes implanted in the brain to apply electrical neurostimulation, which can actually stop the seizure before it occurs.
“Three years ago, the project was basically an idea,” said Erik Biegert, a senior who will graduate in May with an electrical engineering degree. “About one-third of the 3 million epilepsy patients in the United States don’t respond to anti-seizure medications. The only option left for those patients is to undergo surgery to remove the part of the brain that is the issue; we hope to replace that option with something a lot less invasive.”
The project is part of Rice’s Vertically Integrated Projects (VIP) program, which aims to integrate graduate students, seniors and underclassmen. The VIP program began at Georgia Tech, and when it was funded by the Helmsley Trust, the program encouraged nationwide participation. That is how Rice became involved in the project and one of 25 universities in the VIP consortium, according to the team’s faculty adviser Behnaam Aazhang, who is the J.S. Abercrombie Professor of electrical and computer engineering.
The National Science Foundation (NSF) is the sponsor of the broader research project that underlies this VIP project. The NSF-funded project grew out of discussions between Aazhang and Dr. Nitin Tandon, a prominent neurosurgeon at University of Texas Health Science Center at Houston. Tandon, a co-principal investigator of the NSF project, provides real intracranial patient seizure data for the project as well as technical advice and specifications.
While the six seniors who are members of Team Ictal Inhibitors will be moving on after commencement in May, Gary Woods, the team’s co-adviser and professor in the practice in computer technology, said the project will move forward. “A current junior will take the reins for next year and build a senior team to drive the project further along,” he said.
The current team is looking to offer guidance to the next team. Randy Zhang, a senior electrical engineering major, said the team is preparing an academic paper to publish on the project and technology this summer. “In terms of next steps, I think that what mostly needs to be done is work on how the device is actually going to interact with the input electrodes and how it would pass on its output to actual neurostimulators,” he said. “What we really focused on this year was to create the processing unit and all of the machine learning intelligence that can make this happen. On a higher level, the next steps could be to flesh out the design and move it onto a silicon chip so it can be created into an actual device.”
“This is a work in progress, and we’re just scratching the surface,” Aazhang said. “This is at least three to five to seven years away from a product that could begin the clinical trials process, and then there is forming a business partnership, along with the whole FDA approvals process.”
“We’re really proud of the work we did this year,” said Luke Van der Spoel, a senior electrical engineering major. “We received really good feedback from the public and our mentors, but I think winning the competition was a big surprise for us with all of the other great projects. We really didn’t expect it.”
The team also won first place and $500 at Rice’s Electrical and Computer Engineering Corporate Affiliates Day.
“Ictal Inhibitors has created one of the technically most sophisticated projects I’ve mentored, and their performance as an integrated team of engineers is probably the best I’ve seen,” Woods said. “The VIP team structure has allowed the team to perform together at the level of a seasoned team of professional engineers.”
Suggested Items
ASMC 2024 to Showcase AI, Smart Manufacturing and Sustainability to Advance Chip Industry Manufacturing Expertise
03/27/2024 | SEMIMore than 125 experts will offer insights into the latest semiconductor manufacturing strategies and methodologies as hundreds of industry stakeholders gather at the 35th annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC 2024), May 13-16 in Albany, New York.
IPC APEX EXPO 2024: LPKF—Debunking Depaneling Industry Perceptions
03/27/2024 | Nolan Johnson, I-Connect007In this audio interview, listen to Jake Benz discuss advances in laser depaneling at LPKF. Thanks to advances in laser technology, perceptions about laser depaneling are changing from a low-speed, specialized process to a high volume process suitable for production manufacturing. Benz elaborates on some of the development and engineering that went into creating their latest, most capable depaneling machines.
Seeking Employment: Meet Gary Turner
03/25/2024 | Barry Matties, I-Connect007Meet Gary Turner, a recent graduate from the University of Texas at Dallas with a bachelor’s degree in mechanical engineering and a master’s in material science and engineering. He is currently seeking employment in the industry. The following interview will allow you to learn about Gary and see if he might be a good candidate for a position you are looking to fill.
The Challenges, Opportunities, and Future Specialties of PCB Design
03/19/2024 | Stephen V. Chavez, Siemens EDAWhat were once specialties have become more generalized over time—PCB designers must learn about design automation, signal integrity (SI), electromagnetic compatibility (EMC), complex high-speed design, mechanical design, and manufacturability/producibility. Design engineers must learn about layout, simulation, and supply chains—and in their place new specialties have emerged, like multi-gigabit SerDes channel design, advanced manufacturing, IoT, and multi-physics system verification.
Siemens, NVIDIA Expand Collaboration on Generative AI for Immersive Real-time Visualization
03/19/2024 | PRNewswireSiemens announced that it will deepen its collaboration with NVIDIA to help build the industrial metaverse. Siemens is bringing immersive visualization powered by new NVIDIA Omniverse Cloud APIs to the Siemens Xcelerator platform, driving increased use of AI-driven digital twin technology.