Group's Measuring Tool Probes Solar-Cell Materials
June 12, 2017 | Cornell UniversityEstimated reading time: 3 minutes
Next-generation solar cells made from organic compounds hold great promise in meeting future energy needs, but researchers are still striving to gain a deep understanding of the materials involved – including the efficiency with which they convert light into mobile charge, known as photocapacitance.
A Cornell research group led by John Marohn, professor in the Department of Chemistry and Chemical Biology, has proposed a unique method for recording and measuring light-induced mobile charge – at nanoscale lengths and nanosecond time scales – at different areas in a heterogeneous solar-cell material.
Their approach involves a charged microcantilever, which experiences a slight shift in oscillation phase as a result of interaction with a nearby electrically charged material. Marohn likens the technique to how a clock might get affected by an electrical charge, where the difference cannot be seen in real time but the charge’s effect is evident when you compare that clock to an unaffected one.
“The clocks both go around once an hour,” Marohn said, “but one will advance slightly as a result of the interaction with the charge. And by comparing the two clocks, you can see that the one picked up a little extra angle.”
Their paper, “Microsecond photocapacitance transients observed using a charged microcantilever as a gated mechanical integrator,” was published June 9 in Science Advances. Marohn’s collaborators were doctoral students Ryan Dwyer and Sarah Nathan, who share lead-author credit.
The group has applied for patent protection for the technique it developed for this work – phase-kick electric force microscopy (pk-EFM) – with Cornell’s Center for Technology Licensing.
One of the inefficiencies of organic solar-cell materials that Marohn and his group are addressing is recombination. When sunlight hits the material, it creates free charges (negatively charged electrons and positively charged holes) that get turned into electric current. But not all of those free charges escape the cell and turn into current; those that do not turn into current recombine, with the byproduct being heat.
The ability to “see” – or, more accurately, measure – charge generation and recombination following a burst of light was the group’s thrust behind developing pk-EFM. A conductive cantilever is placed near an organic semiconductor film; a voltage pulse is applied to the cantilever, while a carefully timed light pulse is applied to the sample.
The cantilever’s oscillation frequency is shifted slightly by the electrostatic interactions with the mobile charges in the sample. Those interactions result in a phase shift, or “phase kick” as the group calls it. This phase shift persists for a long time (nearly a second) and is therefore relatively easy to measure accurately.
The researchers study this phase shift as a function of the nanosecond time delay between the light pulses and voltages pulses. In this way, the researchers are able to indirectly infer what happened to charges on the nanosecond time scale without having to observe the charge directly, in real time.
“What we wanted was a way to see, in these tiny regions where different molecules are concentrated, how the charges recombine in the various regions of the sample,” Marohn said. “We’re trying to watch things that are both very fast and very small.”
The group’s work is trying to probe more deeply the photocapacitance of organic bulk materials that have previously been examined using time-resolved electric force microscopy. Future work will focus on getting even better spatial and temporal resolution in hopes of ultimately determining which combination of materials is optimal for efficient solar power.
“Solar cells work OK, and we don’t really understand how they work,” Marohn said. “It seems like, if you really understood how they worked, you could make them a lot better. And this is one way to try to figure that out.”
Funding for this work came from the National Science Foundation.
Suggested Items
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
Checking In With ICAPE Group
04/03/2024 | Nolan Johnson, I-Connect007ICAPE Group’s field application engineer Erik Pederson drills down on sustainability, supply chain resiliency, and what value engineering really looks like in this exclusive interview. Founded in 1999, European-based ICAPE Group provides 21 million printed circuit boards and over six million technical parts to manufacturers every month. With 30 PCB manufacturing partners globally and 50 partners providing a wide array of technical parts, ICAPE Group has operations in China, Taiwan, Thailand, South Korea, Vietnam, South Africa, Europe, Mexico, and the United States. The company also focuses on the value proposition for its customers.