Standards Industry Leaders Honored at SEMICON West 2017
July 13, 2017 | SEMIEstimated reading time: 4 minutes
SEMI honored four industry leaders for their outstanding accomplishments in developing Standards for the electronics and related industries. The SEMI Standards awards were announced at the SEMI International Standards reception held during SEMICON West 2017.
Pictured from left to right: James Amano (Director, SEMI International Standards); Yanli "Joyce" Chen (UCT); Bert Planting (ASML); John Visty (Salus Engineering International); Brian Rubow (Cimetrix)
The SEMI International Standards Excellence Award, inspired by Karel Urbanek, is the most prestigious award in the SEMI International Standards Program. The 2017 recipient is Bert Planting (ASML) who has been active in SEMI Standards for more than a decade, without interruption, in numerous international safety standardization projects, including:
- S10 (Safety Guideline for Risk Assessment and Risk Evaluation Process) since 2005
- S27 (Safety Guideline for the Contents of Environmental, Safety, and Health (ESH) Evaluation Reports) since 2010
- S2 (Environmental, Health, and Safety Guideline for Semiconductor Manufacturing Equipment)
- S25 (Safety Guideline for Hydrogen Peroxide Storage and Handling Systems) since 2012
Planting has co-chaired the North American (NA) chapter of the EHS Technical Committee since 2013, and also currently leads the S10 Revision Task Force and the S2 Interlock Reliability Task Force. As leader of the S10 Revision Task Force, he significantly improved S10’s usefulness and practicality. Under his strong direction, the risk assessment methodology of S10 (and by reference, S2) is now more objective, easier to implement, and better harmonized with major international Standards for safety risk assessment. As co-chair of the European EHS Technical Committee from 2005–2013, he successfully led a major S10 revision as well as development of a new Safety Guideline.
The North American SEMI International Standards Merit Award recognizes major contributions to the SEMI International Standards Program. Award winners typically take on a very complex problem at the task force level, gain industry support, and drive the project to completion. This year two people received the award:
Yanli “Joyce” Chen (UCT) reactivated the Pressure Measurements Task Force during the SEMICON West 2014 Standards Meetings. This task force was chartered to develop a series of standardized performance definitions and test methods related to pressure measurement devices used in the semiconductor industry. Previous attempts to develop a standard test method for pressure transducers in gas delivery systems were not successful, but Chen reenergized the Task Force, putting tremendous effort into test apparatus development, test procedure optimization, data collection, and test results analysis, and conducting an extensive pressure transducer side-by-side evaluation project. This provided a solid base for the development of the new Standard, and SEMI F113, Test Method for Pressure Transducers Used in Gas Delivery Systems was approved and published. Chen has also been instrumental in updating several test methods for mass flow controllers and other components with benefits to the entire semiconductor industry.
John Visty (Salus Engineering International) has been the leader of the S2 Chemical Exposure Task Force since 2008; he is also the Task Force leader for the S2 Non-ionization and the S6 (Exhaust Ventilation) Revision. Leading these Task Forces resulted in revisions of SEMI S2, the most recognizable SEMI standard. The industrial hygiene section (regarding chemical exposure) in SEMI S2 was in need of clarification to ensure consistent technical interpretation by equipment suppliers, end-users and third-party evaluators. Visty drove development through multiple ballot attempts, incorporating feedback from unfavorable ballots to reach industry consensus. In March 2017, revisions to SEMI S2 related to chemical exposure were approved and incorporated into SEMI S2. This clarification benefits the semiconductor industry by providing consistent chemical conformance criteria.
The North American SEMI International Standards Leadership Award recognizes outstanding leadership in guiding the SEMI International Standards Program. Brian Rubow (Cimetrix) has been an important contributor to SEMI Standards for many years and has demonstrated ongoing and increasing leadership. Rubow became leader of the North American Diagnostic Data Acquisition (DDA) Task Force in 2008, leader of the NA GEM300 Task Force in 2010, co-chair of the NA Chapter of the Information and Control Committee in 2013, and vice-chair of the NA Regional Standards Committee in 2014. He continues to serve in all four of these positions. Among other accomplishments, Rubow drove the development of two important advances to bring semiconductor factory automation into the world of modern networks:
- SEMI E172, SECS Equipment Data Dictionary (SEDD), which allows factory automation systems to adapt to the individual capabilities of each equipment type
- SEMI E173, SECS Message Notation (SMN), which allows the content of factory messages to be specified in modern XML notation.
Rubow's technical knowledge of factory connectivity solutions and outstanding leadership skills make a major contribution to SEMI International Standards.
About SEMI
SEMI connects nearly 2,000 member companies and 250,000 professionals worldwide annually to advance the technology and business of electronics manufacturing. SEMI members are responsible for the innovations in materials, design, equipment, software, and services that enable smarter, faster, more powerful, and more affordable electronic products. Since 1970, SEMI has built connections that have helped its members grow, create new markets, and address common industry challenges together. SEMI maintains offices in Bangalore, Beijing, Berlin, Brussels, Grenoble, Hsinchu, Seoul, Shanghai, Silicon Valley (Milpitas, Calif.), Singapore, Tokyo, and Washington, D.C.
For more information about SEMI International Standards, click here.
Suggested Items
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Real Time with... IPC APEX EXPO 2024: Going Vertical: SCHMID's Advanced Solutions for Printed Circuit Boards
04/24/2024 | Real Time with...IPC APEX EXPOEditor Marcy LaRont chats with Bob Ferguson, the president of SCHMID, about advanced solutions for PCBs and the equipment they are highlighting at this year's show. He delves into vertical no-touch handling systems and the prospect of achieving sub-10-micron lines. Inspired by SCHMID's technology, Bob expresses excitement about where the industry is today.
Big Win for Defense Production Act Budget Allocation in FY24 Budget
04/23/2024 | I-Connect007 Editorial TeamOne year ago, President Biden issued a determination that chips and packaging are critical for national security. Since that time, much work has been done to continue the conversation in Washington, elevating the importance of the entire chips value chain, and including printed circuit boards and substrates, without which chips cannot operate.
Zentech’s Board of Directors Announces the Return of Matt Turpin as President and CEO
04/22/2024 | Zentech ManufacturingTurpin draws upon over 35 years of experience in the electronics industry and has an 18-year history with Zentech. He previously served as President and CEO from 2006 to 2019 after which time he has remained active in the EMS industry as an advisor to Zentech and other industry organizations.