Controlling Traffic on the Electron Highway: Researching Graphene
August 31, 2017 | Department of Energy, Office of ScienceEstimated reading time: 9 minutes
On an otherwise normal day in the lab, Eva Andrei didn't expect to make a major discovery. Andrei, a physics professor at Rutgers University, was using graphite – the material in pencils – to calibrate a scanning tunneling microscope. As part of the process, she turned on a very powerful magnetic field. When she looked up to see the material's electronic spectrum, she was astonished. "We saw huge, beautiful peaks up there, just incredible. And they didn't make any sense," she recalled.
Remembering a lecture she'd recently attended, she realized the graphite had separated out into sheets just one atom thick. This material, known as graphene, has bizarre electronic properties. But even for graphene, the spectrum she saw was strange. In fact, no one had ever seen anything like it before. As Andrei described it, her colleague "went berserk in the corridor and just yelled ‘Graphene!'" Andrei had made a serendipitous discovery – a new electric phenomenon.
This was neither the first nor last time that electrons' movement in graphene would surprise and elate scientists. One of the most impressive things about graphene is how fast electrons move through it. They travel through it more than 100 times faster than they do through the silicon used to make computer chips. In theory, this suggests that manufacturers could use graphene to make superfast transistors for faster, thinner, more powerful touch-screens, electronics, and solar cells.
But what makes graphene so amazing also hinders its use: Electrons flow through its honeycomb structure too easily. Unlike silicon, graphene lacks a bandgap. Bandgaps are the amount of energy an electron must gain to free itself from an atom and move to other atoms to conduct a current. Like a toll on a highway, electrons need to "pay" with energy to proceed. Electronic devices use bandgaps as gates to control where and when electrons flow. Lacking bandgaps, graphene's structure acts like an electron superhighway with no stop signs.
"Graphene's electrons are so wild and can't be tamed; it's hard to create a gap," said Andrei.
That lack of a bandgap makes graphene currently very difficult to use in modern electronics. Researchers supported by the Department of Energy's (DOE's) Office of Science are investigating ways to overcome this challenge and others to direct graphene's electron traffic.
Electrons Behaving Like Particles of Light
Materials that are just a few atoms thick act fundamentally different than larger amounts of the same material.
"The biggest challenge is having a reliable understanding of the properties of the materials," said Lilia Woods, a physics professor at the University of South Florida.
Even for a material that flat, graphene has some odd characteristics. In most materials, electrons move at different speeds. But in graphene, they all move at the same speed. In fact, electrons in graphene act as if they have no mass – like particles of light. That's one reason why the electrons move so fast and are so difficult to control.
Directing the Electron Traffic
Studying graphene's behavior is one thing. Figuring out how to manipulate it is another. Scientists have been pursuing several different ways to control the electrons in graphene: developing nanoribbons, stretching it, pairing it with boron nitride (another atom-tall material), and applying electrical charges to empty spaces in it. Scientists pursue multiple approaches because they don't know which one will work the best. In the meantime, each approach provides its own unique insight into graphene's basic properties.
Graphene Nanoribbons
Producing graphene nanoribbons is one way to make a material that's already unimaginably thin, even skinnier. These ribbons maintain many of graphene's positive characteristics while potentially giving scientists better control over how the electrons behave, including creating bandgaps.
"You can view these little ribbons as electronic circuit elements," said Michael Crommie, a physicist at DOE's Lawrence Berkeley National Laboratory (Berkeley Lab).
The investigation of nanoribbons began before scientists even got into the lab. Based on calculations, physicists theorized more than a decade ago that nanoribbons could offer new ways to manipulate graphene's electronic properties. Experimentalists have confirmed this idea by developing nanoribbons with consistent, clean edges.
For example, researchers at the University of Wisconsin and elsewhere developed graphene nanoribbons that displayed a bandgap. They showed that when the width of a nanoribbon is smaller than three nanometers, about the thickness of a strand of DNA, it develops a significant bandgap. It also becomes a semiconductor. Unlike graphene's electron superhighway, semiconductors can switch back and forth between conducting electricity or not. The narrower the ribbon, the bigger the gap or the "energy toll" electrons need.
But one challenge is how to make a single nanoribbon that has multiple widths and therefore regions with different bandgaps. Nanoribbons of a single width won't give scientists the level of control needed to design complex circuitry. To solve this problem, Berkeley Lab scientists fused together segments of ribbon with different widths. This "bandgap engineering" is essential to manufacturing semiconductor devices and a big step towards using graphene in circuits.
These nanoribbons can't be used by themselves, so scientists are currently investigating how nanoribbons interact with different surfaces. University of South Florida researchers studied graphene nanoribbons on silicon carbide (SiC) substratesExternal link. They found that how certain edges of nanoribbons attach to the SiC substrate influence the bandgap. Nanoribbons with different widths and edges anchored on different substrates can allow scientists more control over electron properties than nanoribbons that aren't anchored at all.
Page 1 of 2
Suggested Items
North American PCB Industry Sales Down 11.6% in February
03/25/2024 | IPCIPC announced today the February 2024 findings from its North American Printed Circuit Board (PCB) Statistical Program. The book-to-bill ratio stands at 1.07.
North American EMS Industry Up 4.1% in February
03/25/2024 | IPCIPC announced the February 2024 findings from its North American Electronics Manufacturing Services (EMS) Statistical Program. The book-to-bill ratio stands at 1.22.
Intraratio Enhances MES + Yield / IoT Management with New Advanced Manufacturing Analytics
03/22/2024 | IntraratioIntraratio announced AICard, which harnesses the power of artificial intelligence and machine learning to empower manufacturers to make informed decisions quickly and accurately regarding product quality and manufacturing line performance and optimization.
Intel, Biden Admin Announce up to $8.5 Billion in Direct Funding Under the CHIPS Act
03/20/2024 | IntelThe Biden-Harris Administration announced today that Intel and the U.S. Department of Commerce have signed a non-binding preliminary memorandum of terms (PMT) for up to $8.5 billion in direct funding to Intel for commercial semiconductor projects under the CHIPS and Science Act.
Expanded Semiconductor Assembly and Test Facility Database Tracks OSAT and Integrated Device Manufacturers in 670 Facilities
03/18/2024 | SEMIThe new edition of the Worldwide Assembly & Test Facility Database expands coverage to 670 facilities, 33% more than the previous release, including 500 outsourced semiconductor assembly and test (OSAT) service providers and 170 integrated device manufacturer (IDM) facilities, SEMI and TechSearch International announced.