Nanoantenna Arrays Power a New Generation of Fluorescence-Based Sensors
October 17, 2017 | University of BristolEstimated reading time: 1 minute
Researchers from the Universities of Bristol and Bedfordshire, in collaboration with multinational company ABB, have designed and tested a series of plasmonic nanoantenna arrays that could lead to the development of a new generation of ultrasensitive and low-cost fluorescence sensors that could be used to monitor water quality.
The arrays, designed and tested by Dr Neciah Dorh during his PhD at the University of Bristol, are made from aluminium nanorods fabricated using electron beam lithography by commercial partner Kelvin Nanotechnologies. The nanorods, 50nm wide and 158nm long, are designed to resonantly enhance fluorescence emission from a range of contaminants in water such as diesel or tryptophan.
The work, published in Applied Optics, shows a six-fold increase in measured fluorescence emission from a dye. The research also shows that by correctly designing the array element spacing, strongly directional fluorescent emission can be obtained which would allow for highly integrated multi-wavelength sensors to be designed.
The work was carried out in Professor Martin Cryan's research group, which is part of the Photonics Research group in the Department of Electrical and Electronic Engineering.
The project was a collaboration with Dr Andrei Sarua from the School of Physics at Bristol and Dr Tahmina Ajmal from the University of Bedfordshire, who had previously worked on the Aquatest project at Bristol.
Together they developed a prototype low-cost, LED based sensor system, which they plan to develop further into a hand-held field deployable system for performing water quality monitoring.
Martin Cryan, Professor of Applied Electromagnetics and Photonics in the Department of Electrical and Electronic Engineering at the University of Bristol and co-author on the paper, said: "The nanoantenna arrays, which can be fabricated by lower cost production techniques such as nanoimprint lithography, can bring significant sensitivity enhancement so that laboratory quality measurements could be carried out in the field. This would allow for deployment of remote wireless sensor networks for early warning of pollution or continuous monitoring of water quality in sensitive environments."
Dr Dorh, now a Fellow within Bristol’s QTEC programme, has co-founded a start-up, FluoretiQ, developing quantum enhanced fluorescence sensors which will help identify bacteria within minutes rather than days.
Professor Cryan's group is developing systems that could combine the power of nanoantennas with quantum enhanced sensors to produce yet further sensitivity enhancements.
Suggested Items
IMI Taps New Opportunities to Sustain Grit in China
03/28/2024 | IMIIntegrated Micro-Electronics, Inc. (IMI), Joey S. Bantatua, IMI China’s head of operations and general manager was recently interviewed by Asia Electronics Industry (AEI) magazine where he talked about the prospects of the country both as a market and a production hub.
Electronics Industry Sentiment Rises in March
03/27/2024 | IPCIPC releases March 2024 Global Sentiment of the Electronics Supply Chain Report
The Delicate Balance of Sustainable Business and Going Green
03/25/2024 | I-Connect007 Editorial TeamAlex Stepinski is known throughout the industry as an innovator and disruptor committed to environmental sustainability, primarily through his current work around zero liquid discharge (ZLD) for PCB fabrication. But Alex says financial sustainability must come first. Standing firm in his belief that green is the most financially sustainable option for manufacturing and financial success, he explains his position and vision for a greener, more lucrative future for bare board fabricators. “Before I retire in about 10 years,” he says, “I want to make sure that all new fabs, and at least 25% of the old ones are zero liquid discharge in this industry.”
BTU International Redefines Operational Value and Efficiency with the Aurora Platform of Reflow Ovens
03/20/2024 | BTU International, Inc.BTU International, Inc., a leading supplier of advanced thermal processing equipment for the electronics manufacturing market, is proud to announce that its new Aurora platform of reflow ovens is designed to minimize the Cost of Ownership (CoO) while maximizing performance and operational value for its users.
Terran Orbital Unveils Next-Generation SmallSat GEO Solution
03/15/2024 | BUSINESS WIRETerran Orbital Corporation, a global leader in satellite-based solutions primarily serving the aerospace and defense industries, announced their entrance into the small satellite geosynchronous orbit (GEO) market with their SmallSat GEO™ solution for satellites above 500kg.