Additive Manufacturing — a Revolution in Production Engineering
October 20, 2017 | TUMEstimated reading time: 2 minutes
Additive manufacturing processes are the major topic for the future of production engineering. Applications range from producing machine parts of metal through to 3D printing of concrete. Two international symposia, currently taking place at the Technical University of Munich (TUM), illustrate the bandwidth of high-tech additive manufacturing, and give insight into the multifarious expertise existing at the TUM.
Complex metal parts, not milled by a special-purpose machine, but instead structured successively by a laser in next no time from metal powder; casting molds created in a 3D printer from sand and a binding liquid: These are examples of additive manufacturing processes where defined material structures are built layer by layer. Such processes enable shapes that could not be realized before. At the same time, additive manufacturing contributes to a down-sizing of production chains.
In addition to numerous TUM chairs, the Fraunhofer Research Institution for Casting, Composite and Processing Technology (Fraunhofer IGCV), founded in 2016, also takes on a pioneering role. Here, scientists, among others, research processing technology, as well as multi-material processing, meaning, for example, that parts are manufactured from two different metals. Responsible for this work are professors Gunther Reinhart, Klaus Drechsler and Wolfram Volk from the TUM Department of Mechanical Engineering.
Simulation Instead of Trial and Error
Research into additive manufacturing at TUM starts long before the actual printing process. Ernst Rank, Professor for Computation in Engineering and Director of the TUM Institute for Advanced Study (TUM-IAS), develops computer simulations, that aim at predicting the outcome of printing processes. “To date, these processes are usually optimized by trial and error,” says Rank. “To make additive manufacturing viable for industrial mass production, it would be essential to obtain the best possible results in the first print using simulation software.”
Reliable prediction of the mechanical properties of printed parts is a very sizeable challenge because of the many factors that need to be considered. In the laser printing of metals, selective laser melting for example, extremely high but very localized temperatures may lead to undesirable distortion or even to material damage. Professor Rank and his team are exploring new methods of calculation that take these particularities into consideration. “Additive manufacturing processes, especially those that create metal parts, have the potential to revolutionize production processesÆ, says Rank. “But broad-based use for the mass market means that the production chain from virtual computer model through to the ready part must function seamlessly. To achieve this, we need to perfect a fully digitalized manufacturing process.”
Suggested Items
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.