Aismalibar to Present Fastherm at productronica 2017


Reading time ( words)

Aismalibar is set to present their newest product offering, FASTHERM, at productronica which will be held in Munich, Germany from November 14-17, 2017.

FASTHERM was developed by Aismalibar to achieve a faster thermal transition from the LED thermal pad to the heat sink. This technology allows LEDs to operate at a temperature 30°C to 50°C lower due to the direct thermal transition from the thermal pad to the heat sink. This superior thermal transition can be achieved by using the entire COBRITHERM HTC product range with either a copper or copper/aluminium base.

Aismalibar – Benmayor will display at productronica Hall B3 Booth 351

About Aismalibar

Aismalibar was one of the first IMS laminate manufacturers in the world and was the first in Europe. Aismalibar is proud to introduce their material to the North American market in 2012. Their product IMS Cobritherm  is a qualified and recognized Insulated Metal Substrate which gives the best thermal management solutions with high thermal conductivity, low thermal impedance and high dielectric capacity. Aismalibar has implement a 100% proof test with 1-3KV (High Pot Test) to all IMS laminates coming out of their plant. This is the only way to insure the dialectical strength is perfect and that production problems are detected before PCBs arrive to the end user.

Share


Suggested Items

Global Impact on European PCB Fabrication: EIPC Summer Conference 2017, Day 1

06/14/2017 | Pete Starkey, I-Connect007
Electronics industry professionals from 13 countries, mainly from Europe and Scandinavia, others from the USA, but some from as far away as India and Japan, gathered in Meriden, the centre of England, for the EIPC Summer Conference.

HDP User Group 2017 European Meeting Highlights Technology Progress

06/06/2017 | Pete Starkey, I-Connect007
The conference facility at the offices of Oracle, in the royal burgh of Linlithgow in West Lothian, Scotland, was the venue for the 2017 European meeting of the High Density Packaging User Group. I was delighted and privileged to be invited once again to sit in on the open session, an intense programme of technical presentations and discussions, project reviews, status updates and new project proposals.

Ladle on Manufacturing: Testing Times Ahead

05/29/2017 | Marc Ladle, Viking Test Ltd.
Bare board electrical test: For the most part, it does what it says on the tin. Current CAM software and test hardware means that in theory, it is a pretty simple exercise to make sure that a printed circuit matches the intended design. But are you getting the test you think you are?



Copyright © 2017 I-Connect007. All rights reserved.