MacDermid's Metallization Fills Microvias, Plates Through-Holes in One Step


Reading time ( words)

MacDermid Enthone Electronics Solutions, a MacDermid Performance Solutions business, has released MacuSpec VF-TH 200 process, a high performance DC electrolytic copper metallization process for simultaneous via filling and through-hole plating. VF-TH 200 is a highly versatile process capable of replacing multiple steps in incumbent processes while improving the reliability and consistency of the deposit. With VF-TH 200, customers can fill 3x3 to 5x3 mil vias in less than 60 minutes with a dimple of less than 10 microns.

The MacuSpec VF-TH 200 process, in conjunction with MacDermid Enthone’s direct metallization solutions, Shadow, Blackhole, and ENVISION HDI, allows our customers to achieve optimized process performance. Cost savings are realized through waste reduction, decreased copper thickness, and cycle time. The highly evolved process also eliminates the need for pre-dip and flash plating process steps, furthering cost reduction. This unique combination of efficiency, reliability and cost reduction can only be found from the leader in innovation and technology, MacDermid Enthone.

Bill Bowerman, Director of Metallization, MacDermid Enthone, noted, “The VF-TH 200 bath is one of the most versatile and innovative pattern plate copper metallization solutions available to the manufacturers of MSAP / SL-HDI type boards today. On a broader scale, we anticipate VF-TH 200 to become the most widely used copper via filling process in its market segment.“

About MacDermid Enthone Electronics Solutions

MacDermid Enthone Electronics Solutions researches, formulates and delivers specialty chemistries used in the world’s leading electronics. Our products and technical support provide solutions for the most complicated, micro scale circuitry challenges. From wireless devices to automotive and military electronics – in everything you see, and in many things you don’t – MacDermid Enthone is there. To learn more about the MacuSpec VF TH 200 click here.

Share


Suggested Items

HDI: Born in the USA and Making a Comeback

11/22/2017 | Patty Goldman, I-Connect007
There is no denying that high-density interconnect (HDI) has been around a long time—over 25 years, believe it or not. From almost the moment of its conception in the U.S., the technology was adopted by and used almost exclusively in Asia.

Walt Custer’s Annual Update from productronica 2017

11/21/2017 | Patty Goldman, I-Connect007
Industry consultant Walt Custer of Custer Consulting sat down with me at productronica 2017 to once again inform our readers with his yearly update and perspective on what’s happening in the industry. And guess what? It’s good news! Pertinent charts referenced in our conversation are included, but if you want more, Walt invites you to click the link at the end of this conversation and email him directly.

3D Printed Electronics for Printed Circuit Structures

10/04/2017 | Samuel LeBlanc, Paul Deffenbaugh, Jacob Denkins, and Kenneth Church nSCRYPT INC.
Printed electronics is a familiar term that is taking on more meaning as the technology matures. Flexible electronics is sometimes referred to as a subset of this and the printing approach is one of the enabling factors for roll-to-roll processes.



Copyright © 2017 I-Connect007. All rights reserved.