Ucamco Upgrades Gerber Format Specification Manual


Reading time ( words)

Ucamco has released version 2017.11 of the Gerber format specification and version 2017.10 of the proposal to include fabrication documentation in the Gerber format. Both documents are available on Ucamco’s downloads page. To view these documents, click here.

About Ucamco

Ucamco (formerly Barco ETS) is a market leader in PCB CAM software, photoplotting and direct imaging systems, with a global network of sales and support centers. Headquartered in Ghent, Belgium, Ucamco has over 25 years of ongoing experience in developing and supporting leading-edge photoplotters and front-end tooling solutions for the global PCB industry. Key to this success is the company's uncompromising pursuit of engineering excellence in all its products. Ucamco also owns the IP rights on the Gerber File Format through its acquisition of Gerber Systems Corp. (1998).

Share


Suggested Items

Stephen V. Chavez Talks Mil/Aero PCB Design

08/14/2017 | Andy Shaughnessy, PCBDesign007
Stephen V. Chavez, CID+, is the lead PCB designer for the Electronic Systems Center division of UTC Aerospace Systems (UTAS), a military contractor that builds all manner of cutting-edge tools for the American warfigher. He’s been designing military and aerospace PCBs for decades, and he’s a veteran of the United States Marine Corps. I caught up with Steph and asked for his thoughts on designing PCBs for the military and aerospace markets.

Sensible Design: The Little Guide to Resins

10/17/2016 | Alistair Little, Electrolube
I would like to start this series of columns by going back to basics, questioning the core rationale for potting and encapsulation with resins, their fundamental chemistries and how each resin type differs one from the other—indeed, how their individual properties can be exploited to maximise performance under a wide range of environmental conditions.

The Fundamentals of Improving PCB Thermal Design

10/03/2016 | Gabriel Ciobanu, Continental Corp., and Boris Marovic, Mentor Graphics
Continental's automobile engineers have years of experience building critical parts and systems for automobiles. Making sure that automotive electronics are reliable, safe, and properly designed begins at the component level. Heat must be addressed early in the design process for these goals to be achieved. The most important thermal resistance for heat, outside the IC package, is the PCB.



Copyright © 2017 I-Connect007. All rights reserved.