Würth Elektronik and FELA Collaborate on PCB Technology Digitization


Reading time ( words)

Started early in 2017, the two PCB fabricators Würth Elektronik and FELA with their sites in the land Baden Wurttemberg, have been jointly researching on PCB technology digitization. Prototype results in July were encouraging already – in October both partners dispatched first serial orders of their respective pilot projects.

The s.mask technology pushed by FELA and Würth pursues an approach of coating a defined functional surface by 3-D print, independent of varnish and machine fleet. This is  from both companies‘ perspective – the best starting point for gradually digitizing PCB production and its inherent processes.  

Initial material tests and examination results prove a tremendously improved accuracy and various options for an application-specific mask definition. Both offset and basic tolerance ranges can be significantly reduced that way.

Especially the individual surface design allows consideration of customer demands and special requirements, e.g. on dielectric strength values. S.mask as the first and sole technology in the PCB sector allows for direct coating of even more than just one layer of defined and precisely designed dielectric.

First trial series on soldering processes brought another outstanding per-formance to light: Notable improvement could be achieved for most of soldering and assembly issues previously known. Should these observations be confirmed during the test runs envisaged for early 2018, they would yield immense benefits. Both partners are expecting concrete statements for mid of 2018 already.

Norbert Krütt, managing director of FELA in Villingen-Schwenningen, is highly satisfied with the outcomes achieved so far: "The digitization of PCB technology represents a real quantum leap under technological aspects. Functional coatings respectively dielectric are no more generously dispersed like with a watering can but rather utilized in a targeted manner for realizing benefits in downstream processes at both stages, within the PCB production and those at our customers’ sites.“

Beside the advantages in precision and performance, first pilot projects also show an upgrade of the PCB protection, turning out well through gentle application of the functional coating as well as reduced quantity and kind of the chemicals deployed.

The cooperation is conducted at all levels, from top management via R&D up to shared communication.  Andreas Gimmer, managing director of Würth Elektronik CBT in Schopfheim, says: "Since the time we started our cooperative partnership, it has been seen that the way our companies are working together provides multifarious synergies. We expect economic success for us, but also find that common research and development is simply pleasure.“

About Würth Elektronik Circuit Board Technology (CBT)

Würth Elektronik Circuit Board Technology was founded in 1971 and has established itself as one of the leading PCB manufacturers in Europe. De-velopers are able get standard circuit boards, new and innovative technolo-gies and even complete system solutions all from one source. Here at Würth Elektronik, we cover the entire product life cycle, from the initial idea for a design, for example during early R&D projects, to the production of prototypes on the online shop WEdirekt and finally, manufacturing of medium and large volumes in Germany or Asia. Knowledgeable specialists are not just located at our German plants. Internationalization is an important strategic aspect for Würth Elektronik. We have numerous sales teams set up across many European countries.

Every day more than 120 new PCB designs enter our production. We have over 4,000 customers, ranging from large corporations to one-man designers. In addition to the personal care provided through our dense network of over 100 internal and external sales people, customers also have the option to purchase printed circuit boards online through the easy to use online shop, WEdirekt.

For more information, click here.

About FELA GmbH

FELA is one of the five largest circuit board manufacturers in Germany and has made the leap from simple contract manufacturer to innovative system provider. “Help us shape the future!”  with this motto, FELA GmbH is a fixture on today’s market.

FELA, a private, independent medium-sized enterprise based in the south-ern Black Forest with a 165-strong workforce, generated sales of €23.6m in 2016. The company has its headquarters in Villingen-Schwenningen and an additional distribution centre in Solingen.

As well as manufacturing and selling FR4-based circuit boards, other mainstays of the company’s activities include manufacturing capacitive glass input systems with the brand name FELAM GLASLINE and, as a technological leader, FELAM THERMOLINE technology, IMS circuit boards and sys-tems for aluminium or copper-based power LED applications. For more information, click here.

 

 

 

 

 

 

 

Share


Suggested Items

The IPC High-Reliability Forum for Mil-Aero and Automotive Sectors

09/24/2018 | Happy Holden, I-Connect007
I-Connec007’s Happy Holden had the pleasure of attending IPC’s High Reliability Forum (HRF) in Baltimore in May. As the IPC scripted it, it was a “Technical Conference with a Focus on Electronics Subjected to Harsh-Use Environments.”

Ventec Keeps 'Shaking Things Up' with tec-speed 20.0

09/10/2018 | Barry Matties, I-Connect007
At the EIPC summer conference, I-Connect007 Publisher Barry Matties caught up with Ventec Europe & Americas COO Mark Goodwin, who provided an update on Ventec’s new products, the current state of the company, and how Ventec is shaking things up in the materials marketplace.

PCBs Are Moisture-Sensitive Devices

09/07/2018 | Richard Heimsch, SUPER DRY
Research by SMT & Hybrid GmbH (now SMT Elektronik) was conducted just prior to the original publication of IPC-1601, which now provides detailed guidelines for the packaging and storage of PCBs, both from the PCB manufacturer and at the assembler’s manufacturing floor.



Copyright © 2018 I-Connect007. All rights reserved.