Panasonic and Matrix Complete Outgassing Tests for Flex Materials


Reading time ( words)

Panasonic Flex materials and Matrix Flex Coverlay materials have passed the ASTM E595-15 outgassing test. The part numbers included in this certification include:

Panasonic_Matrix.jpg

Bob Berg, Matrix VP of sales, said, “Many of our customers make flex circuits that go into space applications, and a key test to qualify materials in space is the ASTM E595-15 outgassing test. This is a very stringent requirement and passing this test ensures that Panasonic Flex and Matrix Plus coverlay materials qualify for applications used in the deep vacuum of space.”

About Matrix USA Inc.

Committed to the motto, “Quality Products, Dependable People,” Matrix was established in 1977 with the objective of providing quality raw materials to the North American Printed Circuit Board Industry. Matrix has four rapid-response warehouses located throughout the US and Canada that fulfill high quality, fast delivery, and custom orders daily. For further information, click here.

About Panasonic

Panasonic Corporation is a worldwide leader in the development and engineering of electronic technologies and solutions for customers in residential, non-residential, mobility and personal applications. Since its founding in 1918, the company has expanded globally and now operates over 500 consolidated companies worldwide, recording consolidated net sales of 7.74 trillion yen for the year ended March 31, 2014. Committed to pursuing new value through innovation across divisional lines, the company strives to create a better life and a better world for its customers. For more information, click here.

Share


Suggested Items

IPC 6012-DA Revisions: The Approach to Cleanliness, Thickness, Inspection, and Wicking

04/13/2018 | Jan Pedersen, ELMATICA
IPC’s Automotive Addendum task group was started in November 2014 and the first edition of IPC 6012-DA was released in April 2016. We are now working on the revised version, and expect a release in Q2 2018. As standards need to evolve, develop and follow the needs of the industry, this work is continuous.

Institute of Circuit Technology Meriden Seminar, 2018

03/21/2018 | Pete Starkey, I-Connect007
The Institute of Circuit Technology returned to Meriden, traditionally regarded as the centre of England, for its Annual General Meeting, which was followed by a technical seminar of five presentations, introduced as ever by Technical Director Bill Wilkie.

Ventec: Eye on the Future, with Automotive and Lighting Front and Center

12/19/2017 | Pete Starkey and Patty Goldman, I-Connect007
Ventec’s Thomas Michels and Didier Mauve sat down with I-Connect007 Editors Patty Goldman and Pete Starkey and enjoyed an upbeat and enlightening conversation. Among the topics covered were the importance of working partnerships in maintaining supply chain continuity, market drivers for thermally conductive materials, and development of enabling technologies to support the automotive electronics revolution.



Copyright © 2018 I-Connect007. All rights reserved.