LaserVia Sells Intellectual Property Portfolio


Reading time ( words)

LaserVia Corporation has announced that it is putting its intellectual property portfolio up for sale.

The timing on this announcement fits well with the recent renewed interest and energy for the advancement of high density interconnects (HDI) which has increased the demand for improved laser drilled blind microvias; including z-axis interconnect using blind microvias. Potentially valuable interconnect advances include via-in-pad slots and other shapes instead of round holes allowing significant reductions in the footprint for surface mounted component pads.

laser1.jpg

Advances in laser drilling is further possible with a proposed laser drilling machine design that can drill both sides of a circuit board using an inline system for improved processing speeds resulting in lower cost:

laser2.jpg 

The IP for sale includes the valuable US Patents 6,631,558 & 7,062,485.

For additional information please contact Dan Feinberg at Fein-Line Associates (949) 498-7866 baer@feinline.com or Larry Burgess at Laservia (503) 446-7248 lwburgess@laservia.com.

Share


Suggested Items

Atotech Brings World-Class AHDI to the U.S.

12/06/2018 | I-Connect007 Editorial Team
During our walk-through of the GreenSource Fabrication facility with VP Alex Stepinski, he started the conversation on surface preparation and plating by saying, “We have Atotech horizontal production technology in place here. We’ve been running Atotech turnkey solutions for a while.

Increasing Productivity for Flex Fabricators

11/14/2018 | I-Connect007 Editorial Team
Barry Matties and Nolan Johnson of I-Connect007 met with Shane Noel and industry veteran Mike Jennings of ESI to discuss the introduction of their CapStone laser tool, a product aimed at doubling their flex circuit fabricators’ throughput. Mike also shares advice for fabricators who are looking to move into the ever-growing flex market.

Study on Application of Four-Wire and Four-Terminal Flying Probe Test Scheme

08/10/2018 | Jin Erbing, Joint Stars Technology Co., Ltd
With the four-wire and four-terminal flying probe test method, voids in the holes formed in the PCB due to process differences, thin copper, and poor conduction due to residual adhesive after laser drilling of the HDI board can be detected, and the circuit board guide can be solved. With the development of multilayer, high-density PCB layout, four-wire four-terminal flying probe testing will play an increasingly important role.



Copyright © 2018 I-Connect007. All rights reserved.