Advances in Lasers Get to the Long and Short of it
January 30, 2018 | AIP.orgEstimated reading time: 2 minutes
Since lasers were first developed, the demand for more adaptable lasers has only increased. Chiral nematic liquid crystals (CLCs) are an emerging class of lasing devices that are poised to shape how lasers are used in the future because of their low thresholds, ease of fabrication, and ability to be tuned across wider swaths of the electromagnetic spectrum. New work on how to select band-edge modes in these devices, which determine the lasing energy, may shine light on how lasers of the future will be tuned.
The laser cavities are formed of a chiral nematic liquid crystal doped with a fluorescent dye. The liquid crystal creates a photonic bandgap in the laser cavity. An international team of researchers demonstrated a technique that allows the laser to electrically switch emission between the long- and short-wavelength edges of the photonic bandgap simply by applying a voltage of 20 V. They report their work this week in Applied Physics Letters, from AIP Publishing.
“Our contribution is to find a way to change the orientation of the transition dipole moment of the gain medium [the fluorescent dye] in the CLC structure and achieve mode selection between long- and short-wavelength edges without tuning the position of the photonic bandgap,” said Chun-Ta Wang, an author of the paper. “We also demonstrated a polymer-stabilized CLC system, which improved the laser's stability, lasing performance and threshold voltage.”
CLC lasers work through a collection of liquid crystals that self-assemble into helix-shaped patterns, which then act as the laser’s cavity. These helices are chiral, meaning they corkscrew in the same direction, which allows them to be tuned across a wide range of wavelengths. While many lasers, like the laser diodes used in DVD players, are fixed at one color, many CLC lasers can be tuned to multiple colors in the visible light spectrum and beyond.
In addition to tuning the lasing wavelength, one hot area of inquiry is in finding different ways of tuning the wavelength by switching the lasing mode from one edge of the photonic bandgap to the other. Some attempts so far have suggested it is possible to switch between the long- and short-wavelength edges.
Wang’s team’s work demonstrates that this mode switching is possible by applying a direct-current electric field to the fluorescent dye, altering its order parameter without affecting the spectral position of its bandgap. The researchers tested three mixtures by varying ratios of liquid crystals and dyes and recording their laser outputs through fiber-optic spectrometry.
They found that it was possible for all the samples to shift from lasing at the short-wavelength edge to lasing at the long-wavelength edge, a shift of nearly 40 nanometers, with as little as 20 volts. Moreover, a polymer-stabilized planar CLC sample was able to leverage its extra structural stability to reversibly switch between the two modes and showed improved performance and threshold voltage.
“There have been many calculations for how to achieve this phenomenon in this field, but to our knowledge, this is the first time it was proven experimentally,” Wang said.
Looking ahead, Wang said widespread use of CLC lasers is still slated for the future. In the meantime, he and his team are hoping to expand our understanding of electrically assisted band-edge mode selection in other types of photonic crystals.
Suggested Items
Real Time with... IPC APEX EXPO 2024: Advancements in Laser Depaneling with LPKF
04/24/2024 | Real Time with...IPC APEX EXPOJake Benz, LPKF sales manager for North America, discusses the company's advancements in laser depaneling. LPKF has introduced a green wavelength laser for processing rigid FR-4 circuit boards, bringing significant gains in processing speeds to market. The company transitioned from IR CO2 to UV wavelength due to heat and burning issues.
Mycronic Receives Order for an SLX Mask Writer
04/11/2024 | MycronicMycronic AB has received an order for an SLX mask writer from a new customer in Asia. The order value is in the range of USD 7-9 million. Delivery of the system is planned for the second quarter of 2025.
Plastronics and the New IPC Guidelines for In-mold Electronics (IME)
04/11/2024 | Barry Matties, I-Connect007In the ever-evolving world of electronics, the roads for the integration of electronics assemblies into 3D structures continue to grow into a set of technologies used to produce 3D plastronics parts and revolutionize mainly the automotive industry. IPC has been developing standards for this set of technologies, led by Francisco Fourcade, IPC electronics technology standards manager.
MKS Introduces ESI Geode G2 CO2 Laser System for High- Precision and High-Speed HDI and mSap Via Drilling
04/09/2024 | MKS Instruments, Inc.MKS Instruments, Inc., a global provider of technologies that transform our world, today announced the official launch of the ESI Geode™ G2 laser drill system, the next generation of the Geode™ platform for processing PCB and ICP materials.
MKS’ Atotech, ESI to Participate in IPC APEX EXPO
03/29/2024 | MKS’ AtotechMKS’ Atotech and ESI will participate in this year’s IPC APEX EXPO 2024, the PCB industry’s largest event in North America, to be held in Anaheim, California, to be held from April 6-11 2024 at the Anaheim California Convention Center.