Aismalibar North America to Exhibit at Strategies in Light


Reading time ( words)

Aismalibar will exhibit at the Strategies in Light trade show in Anaheim, California on February 13-15, 2018. Strategies in Light is the leading LED and lighting event in North America and has been for more than 15 years. Aismalibar North America can be found at booth 328 and encourages all to come see their cutting edge thermal management solutions.

Aismalibar will be showcasing their newest high technology Insulated Metal Substrate - Cobritherm Ultra-Thin. Aismalibar developed Ultra-Thin with a dielectric layer thickness of only 35 microns that provides higher thermal performance and excellent working temperatures. This product is well suited for high end LED applications.

In addition, Aismalibar will be featuring FASTHERM. This product is used to achieve a faster thermal transition from the LED thermal pad to the heat sink. This technology allows LEDs operate at a temperature 30°C to 50°C lower due to the direct thermal transition from the thermal pad to the heat sink. This superior thermal transition can be achieved by using the entire COBRITHERM HTC product range with either a copper or copper/aluminium base.

About Aismalibar

Aismalibar is a manufacturer of copper clad laminates who produces high quality base materials for the PCB industry. Our products provides superior thermal management through high thermal conductivity, low thermal impedance and high dielectric capacity.  AISMALIBAR was one of the first IMS laminate manufacturers in the world and was the first in Europe. AISMALIBAR is proud to introduce their material to the North American market in 2012. Their product IMS Cobritherm ® is a qualified and recognized Insulated Metal Substrate which gives the best thermal management solutions with high thermal conductivity, low thermal impedance and high dielectric capacity. AISMALIBAR has implement a 100% proof test with 1-3KV (High Pot Test) to all IMS laminates coming out of their plant. This is the only way to insure the dialectical strength is perfect and that production problems are detected before PCBs arrive to the end user.

Share


Suggested Items

ACE’s AccuWrap Simplifies Multiple Sequential Laminations with Blind Vias

05/29/2018 | Andy Shaughnessy
At DesignCon 2018, I spoke with James Hofer, general manager for Accurate Circuit Engineering, a quick-turn fabricator based in Santa Ana, California. James gave me a preview of AccuWrap, a new type of processing technology that lets designers reduce the amount of copper during sequential laminations while still meeting IPC specs, which should be of great interest to RF designers.

Triangle Labs: Covering the Niche Market of Large Boards

05/18/2018 | Patty Goldman, I-Connect007
I recently had the opportunity to speak with John-Michael Gray, president of Triangle Labs. We had quite a discussion on their rather unique capability of building large-format PCBs and multilayers—perhaps the largest PCBs in the world.

The Vast Offerings in Laminate Technologies from TUC

04/10/2018 | Patty Goldman, I-Connect007
While at IPC APEX EXPO a few weeks ago, I sat down with George Hsin, chief strategy officer for TUC Worldwide, and Alan Cochrane, president of TUC North America. I was interested in learning more about the company and their laminate products and Alan was happy to fill me in.



Copyright © 2018 I-Connect007. All rights reserved.