Why Polymer Solar Cells Deserve Their Place In the Sun
February 22, 2018 | AIP.orgEstimated reading time: 2 minutes
Unlike traditional silicon solar cells, organic polymer solar cells (PSCs) may never cover the hillsides of a megawatt solar farm. But, these lightweight, flexible cells show potential to provide solar power to remote microwatt sensors, wearable technology and the Wi-Fi-connected appliances constituting the “internet of things.”
PSCs use organic polymers to absorb light and convert it to electricity. While PSCs cannot match the durability or efficiency of inorganic solar cells, the potential to mass-produce nontoxic, disposable solar panels using roll-to-roll production makes them attractive for additional applications. In a paper published this week in the Journal of Renewable and Sustainable Energy, from AIP Publishing, Paul Berger and Minjae Kim of Ohio State University review the latest advances and remaining challenges in PSC technology.
Research into PSCs has grown rapidly over the last two decades, generating increasing numbers of publications and patents. This emerging technology, however, is unlikely to replace traditional inorganic solar cells. Instead, Berger sees PSCs as complementary. They can bypass the high-voltage transmission lines and provide electricity to point-of-use devices that would otherwise require toxic batteries.
For example, PSCs could power freshness sensors on food packaging simply using the overhead lights in grocery stores. Furthermore, they could go beyond store inventory control, and tie into a “smart kitchen” to reduce food waste and automate grocery lists. “PSCs have this ability to be flexible, because they basically are plastics, so you can put them on backpacks, jackets and even coffee creamer -- a whole range of things where it’s at the point of use,” said Berger. “It’s a disruptive business model.”
The polymers can be dissolved in solvents and printed onto a flexible backing using affordable roll-to-roll production, making this technology especially attractive. “This printing press is not unlike the one for printing your Sunday newspaper, but instead of three primary colors and black, you’re printing the four or five different layers needed for the solar cell, diodes and transistors,” Berger said. Long rolls of solar cells also open up new applications, such as wrapping vehicles or covering building facades and windows. Berger cautions, however, that certain expensive PSC raw materials, namely indium tin oxide and fullerenes, which have proved challenging to replace, may limit near term affordability.
Longevity is another issue because the polymers and reactive metal cathodes oxidize when exposed to water and oxygen. “They tend to degrade fairly quickly,” Berger said, making it necessary to encapsulate the solar cells for protection. This encapsulation can be very effective on glass, but is more challenging on flexible surfaces, like potato chip bags.
In the lab, PSC efficiency reaches about 13 percent, which is far from the 20 percent efficiency of commercial solar panels. PSCs that use P3HT:PCBM polymers, introduced in 2002, are the standard “workhorse” design and yield about 3.5 percent efficiency. Recent advances in chemistry, geometry, and the development of tandem solar cells that stack multiple layers together have made this greater efficiency possible.
A handful of companies in the U.S. and Europe are working to bring viable PSCs to market. If successful, then PSCs could establish their own niche apart from silicon solar cells, powering all manner of remote devices.
Suggested Items
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Koh Young Showcases Award-winning Inspection Solutions at SMTconnect with SmartRep in Hall 4A.225
04/25/2024 | Koh Young TechnologyKoh Young Technology, the industry leader in True 3D measurement-based inspection solutions, will showcase an array of award-winning inspection and measurement solutions at SMTconnect alongside its sales partner, SmartRep, in booth 4A.225 at NürnbergMesse from June 11-13, 2023. The following offers a glimpse into what Koh Young will present at the tradeshow:
Real Time with… IPC APEX EXPO 2024: Plasmatreat: Innovative Surface Preparation Solutions
04/25/2024 | Real Time with...IPC APEX EXPOIn this interview, Editor Nolan Johnson speaks with Hardev Grewal, CEO and president of Plasmatreat, a developer of atmospheric plasma solutions. Plasmatreat uses clean compressed air and electricity to create plasma, offering environmentally friendly methods for surface preparation. Their technology measures plasma density for process optimization and can remove organic micro-contamination. Nolan and Hardev also discuss REDOX-Tool, a new technology for removing metal oxides.
Nanotechnology Market to Surpass $53.51 Billion by 2031
04/25/2024 | PRNewswireSkyQuest projects that the nanotechnology market will attain a value of USD 53.51 billion by 2031, with a CAGR of 36.4% over the forecast period (2024-2031).