Lithium-Related Discovery Could Extend Battery Life, Improve Safety


Reading time ( words)

Lithium-metal batteries are among the most promising candidates for high-density energy storage technology in an expanding range of digital “smart” devices and electrical vehicles, but uncontrolled lithium dendrite growth, which results in poor recharging capability and safety hazards, currently tempers their potential.

New research from Arizona State University finds that using a 3-D layer of polydimethylsiloxane (PDMS), or silicone, as the substrate of the lithium metal anode can mitigate dendrite formation and both dramatically extend battery life and diminish safety risks. The paper, “Stress-driven lithium dendrite growth mechanism and dendrite mitigation by electroplating on soft substrates,” was published today in Nature Energy.

According to Hanqing Jiang, a professor in ASU's School for Engineering of Matter, Transport and Energy, in the Ira A. Fulton Schools of Engineering, and a lead researcher on the paper, the findings have relevance for both lithium-ion and lithium-air batteries, as well as implications for other metal-anode-based batteries.

“Almost all metals used as battery anodes tend to develop dendrites,” Jiang explained. “For example, these findings have implications for zinc, sodium and aluminum batteries as well.”

Jiang said he and the research team, rather than approaching the problem from a materials or electrochemical perspective, looked for solutions as mechanical engineers. “We already know that tiny tin needles or whiskers can protrude out of tin surfaces under stress, so by analogy we looked at the possibility of stress as a factor in lithium dendrite growth.”

The first round of research involved adding a layer of PDMS to the bottom of the battery anode.

“There were remarkable reductions in dendrite growth,” Jiang said.

The researchers discovered that this is directly related to the fact that stress accumulated inside the lithium metal is relieved by the deformation of the PDMS substrate in the form of “wrinkles.”

“This is the first time convincing evidence shows that residual stress plays a key role in the initiation of lithium dendrites,” Jiang said.

In addition to obtaining a fundamental understanding of the lithium dendrite growth mechanism, Jiang’s group also came up with a smart way to utilize the phenomenon to extend the life of lithium-metal batteries while maintaining their high energy density. The solution is to give PDMS substrate a three-dimensional form with a lot of surface.

“Envision sugar cubes that contain a lot of small internal pores,” Jiang explained. “Inside these cubes, the PDMS forms a continuous network as the substrate, covered by a thin copper layer to conduct electrons. Finally, lithium fills the pores. The PDMS, which serves as a porous, sponge-like layer, relieves the stress and effectively inhibits dendrite growth.”

“By synergistically combining with other lithium dendrite suppression methods such as new electrolyte additives, the finding has broad implications for making lithium-metal batteries a safe, high-density, long-term energy storage solution,” said Professor Ming Tang, a research team member at Rice University. “Potential applications range from personal electronic devices to powering electric cars for exceptionally longer periods to being the back-up electric supply for solar power grids.”

Partners in the research include members of Jiang’s group at ASU: Xu Wang, Wenwen Xu and Haokai Yang; Wei Zeng, a visiting ASU scholar co-advised by Jiang and Professor Huigao Duan at Hunan University, China; and researchers from Rice University including Liang Hong, Fan Wang and their adviser Ming Tang. Funding was provided in part by the Department of Energy.

Share


Suggested Items

What’s Coming in 3D Printing Technology in 2018

12/27/2017 | Cullen Hilkene, 3Diligent
First, the arrival of extrusion metal printing. Today's extrusion printers are the most prevalent and, arguably, user-friendly 3D Printers in the market. Now, after years of there being zero metal extrusion printers, there will be two in the new year from Desktop Metal and Markforged. These technologies promise new materials and a higher degree of user friendliness for metal printing.

Inkjet-printed Liquid Metal Could Bring Wearable Tech, Soft Robotics

04/08/2015 | Purdue University
New research shows how inkjet-printing technology can be used to mass-produce electronic circuits made of liquid-metal alloys for "soft robots" and flexible electronics.



Copyright © 2018 I-Connect007. All rights reserved.