Weird Superconductor Leads Double Life
March 21, 2018 | SLAC National Accelerator LaboratoryEstimated reading time: 4 minutes
Until about 50 years ago, all known superconductors were metals. This made sense, because metals have the largest number of loosely bound “carrier” electrons that are free to pair up and flow as electrical current with no resistance and 100 percent efficiency – the hallmark of superconductivity.
Image caption: One unusual property of superconducting materials is that they expel magnetic fields and thus cause magnets to levitate, as shown here. A study at SLAC and Stanford of a particularly odd superconductor, strontium titanate, will aid understanding and development of these materials. (ViktorCap/iStock)
Then an odd one came along – strontium titanate, the first oxide material and first semiconductor found to be superconducting. Even though it doesn’t fit the classic profile of a superconductor – it has very few free-to-roam electrons – it becomes superconducting when conditions are right, although no one could explain why.
Now scientists have probed the superconducting behavior of its electrons in detail for the first time. They discovered it’s even weirder than they thought. Yet that’s good news, they said, because it gives them a new angle for thinking about what’s known as “high temperature” superconductivity, a phenomenon that could be harnessed for a future generation of perfectly efficient power lines, levitating trains and other revolutionary technologies.
The research team, led by scientists at the Department of Energy’s SLAC National Accelerator Laboratory and Stanford University, described their study in a paper published Jan. 30 in the Proceedings of the National Academy of Sciences.
"If conventional metal superconductors are at one end of a spectrum, strontium titanate is all the way down at the other end. It has the lowest density of available electrons of any superconductor we know about,” said Adrian Swartz, a postdoctoral researcher at the Stanford Institute for Materials and Energy Science (SIMES) who led the experimental part of the research with Hisashi Inoue, a Stanford graduate student at the time.
“It’s one of a large number of materials we call ‘unconventional’ superconductors because they can’t be explained by current theories,” Swartz said. “By studying its extreme behavior, we hope to gain insight into the ingredients that lead to superconductivity in these unconventional materials, including the ones that operate at higher temperatures.”
Dueling Theories
According to the widely accepted theory known as BCS for the initials of its inventors, conventional superconductivity is triggered by natural vibrations that ripple through a material’s atomic latticework. The vibrations cause carrier electrons to pair up and condense into a superfluid, which flows through the material with no resistance – a 100-percent-efficient electric current. In this picture, the ideal superconducting material contains a high density of fast-moving electrons, and even relatively weak lattice vibrations are enough to glue electron pairs together.
But outside the theory, in the realm of unconventional superconductors, no one knows what glues the electron pairs together, and none of the competing theories hold sway.
To find clues to what’s going on inside strontium titanate, scientists had to figure out how to apply an important tool for studying superconducting behavior, known as tunneling spectroscopy, to this material. That took several years, said Harold Hwang, a professor at SLAC and Stanford and SIMES investigator.
“The desire to do this experiment has been there for decades, but it’s been a technical challenge,” he said. “This is, as far as I know, the first complete set of data coming out of a tunneling experiment on this material.” Among other things, the team was able to observe how the material responded to doping, a commonly used process where electrons are added to a material to improve its electronic performance.
‘Everything is Upside Down’
The tunneling measurements revealed that strontium titanate is the exact opposite of what you’d expect in a superconductor: Its lattice vibrations are strong and its carrier electrons are few and slow.
“This is a system where everything is upside down,” Hwang said.
On the other hand, details like the behavior and density of its electrons and the energy required to form the superconducting state match what you would expect from conventional BCS theory almost exactly, Swartz said.
“Thus, strontium titanate seems to be an unconventional superconductor that acts like a conventional one in some respects,” he said. “This is quite a conundrum, and quite a surprise to us. We discovered something that was more confusing than we originally thought, which from a fundamental physics point of view is more profound.”
He added, “If we can improve our understanding of superconductivity in this puzzling set of circumstances, we could potentially learn how to harvest the ingredients for realizing superconductivity at higher temperatures.”
The next step, Swartz said, is to use tunneling spectroscopy to test a number of theoretical predictions about why strontium titanate acts the way it does.
SIMES is a joint SLAC/Sanford institute. Theorists from SIMES and from the University of Tennessee, Knoxville also contributed to this study, which was funded by the DOE Office of Science and the Gordon and Betty Moore Foundation’s Emergent Phenomena in Quantum Systems Initiative.
Suggested Items
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.