Nanocrystalline Graphite Enables New Class of Harsh Environment Electronics
March 21, 2018 | University of BristolEstimated reading time: 1 minute
Researchers from the Universities of Bristol and Southampton, in collaboration with Microsemi, have demonstrated reliable operation of microelectromechanical relays by coating the contacts with nanocrystalline layers of graphite, to enable ultra-low-power electronics for harsh environments.
Image caption: A microelectromechanical relay with the contact electrode surfaces covered by a 100nm thick layer of nanocrystalline graphite (inset)
Micro and nanoelectromechanical relays have effectively zero leakage current and can operate at much higher temperatures and levels of radiation than solid-state transistors. Such miniaturised relays have great potential to realise smart electronic components with integrated sensing, processing and actuation that are extremely energy-efficient.
The work, published in Carbon, demonstrates how films of nanocrystalline graphite that have a thickness of tens of nm protects the relay tips against degradation over millions of switching cycles and provides a reliable electrical contact.
The relays were designed by Dr Sunil Rana, a senior postdoctoral research associate at Bristol. The work was carried out as a collaboration between Bristol's Microelectronics research group led by Dr Dinesh Pamunuwa, and Dr Harold Chong’s group at Southampton University, with Dr Jamie Reynolds and Dr Suan Hui Pu.
Dr Pamunuwa, Reader in Microelectronics at the Department of Electrical and Electronic Engineering at the University of Bristol and corresponding author on the paper, said: "This is a breakthrough result that could pave the way for a new class of extremely energy-efficient electronic components for use in emerging paradigms such as autonomous sensor nodes in the Internet-of-Things.
"The relays can withstand temperatures over 225˚C and can easily absorb radiation doses that are two orders of magnitude higher than transistors are able to withstand. The challenge has been to make them reliable, and these thin films of nanocrystalline graphite effectively act as a conducting solid lubricant, protecting the relay electrodes as they physically make and break contact millions of times."
Dr Pamunuwa has been working on development of nanoelectromechanical relays for digital applications for over seven years, and this work has been supported by the UK government through grants from the Defence, Science and Technology Laboratory (DSTL), and Innovate UK as well as the EU.
Suggested Items
The Right Approach: I Hear the Train A Comin'
04/25/2024 | Steve Williams -- Column: The Right ApproachTraining is often an afterthought in many organizations, and the longer a company has been in business, the more this seems to apply. Over the past couple of decades, it has been amazing to observe that the biggest offenders of this are the companies that overuse the sound bite, “Our most important assets are our people.” When you dig into the process and peel back the onion, their commitment to training is not commensurate with that statement.
Big Win for Defense Production Act Budget Allocation in FY24 Budget
04/23/2024 | I-Connect007 Editorial TeamOne year ago, President Biden issued a determination that chips and packaging are critical for national security. Since that time, much work has been done to continue the conversation in Washington, elevating the importance of the entire chips value chain, and including printed circuit boards and substrates, without which chips cannot operate.
IDTechEx Examines the Opportunities for Wearables in Digital Health
04/19/2024 | IDTechExIDTechEx’s report, “Digital Health and Artificial Intelligence 2024-2034: Trends, Opportunities, and Outlook”, covers this ongoing trend in the consumer health wearables market and includes analysis of the opportunities and roadmap for biometric monitoring.
NCAB Appoints Tim Benjamin as New CFO
04/15/2024 | NCAB GroupNCAB Group has appointed Tim Benjamin as its new CFO. Tim has a long and broad experience of managerial business finance roles, including M&A and IT.
Plastronics and the New IPC Guidelines for In-mold Electronics (IME)
04/11/2024 | Barry Matties, I-Connect007In the ever-evolving world of electronics, the roads for the integration of electronics assemblies into 3D structures continue to grow into a set of technologies used to produce 3D plastronics parts and revolutionize mainly the automotive industry. IPC has been developing standards for this set of technologies, led by Francisco Fourcade, IPC electronics technology standards manager.