Third Generation Semiconductor Materials Show Market Potential
March 26, 2018 | TrendForceEstimated reading time: 2 minutes
5G is expected to enter commercial operation in 2020, while vehicles become more intelligent, networked and electric, driving the development of SiC and GaN, the third-generation semiconductor materials. TrendForce estimates that the revenue for SiC substrates and GaN substrates will be US$180 million and US$3 million respectively in 2018.
SiC and GaN devices are more resistant to high-voltage operations compared with mainstream Si-based ones. SiC and GaN materials also outperform Si in operations of high-temperature and high-frequency respectively. In SiC and GaN power devices, the sizes of chips are smaller, while the circuit designs are simplified. As the result, modules, components and cooling systems are also smaller in size. The entire vehicles will become more lightweight in this way. In addition, SiC and GaN’s properties of low on-resistance and low switching loss will be key to improving automotive battery life. Therefore, the development of SiC and GaN power devices is closely associated with the advancement of electric vehicles.
However, SiC materials remain in the stage of testing and introduction. In the automotive area, SiC power devices are only applied to race cars now, so SiC-based solutions’ output by area accounts for less than 0.1% of all automotive power devices worldwide, according to TrendForce. Currently, GaN-on-SiC and GaN-on-Si are two mainstream production approaches for GaN power devices. GaN-on-SiC has excellent heat dissipation performance and is suitable for high-frequency operations, making it commonly used in 5G base stations. It is expected that the market of SiC substrates will escalate in the next five years after automobile companies finish the tests and 5G goes into commercial operation in 2020.
The costs of GaN substrates remain high, so the revenue of GaN substrates is much smaller than that of SiC substrates for current stage. However, GaN devices’ resistance to high-frequency conditions makes them a point of focus for technology companies. GaN-on-SiC technology is now used in high-specification products. On the other hand, GaN-on-Si is more cost-effective and becomes the mainstream in GaN power device market, with higher possibility of growth in sectors of power management chips and charging systems for automobiles and smartphones.
The third generation semiconductor materials show market potential due to rapid development of 5G and automotive technology. Manufacturers have been providing foundry services of SiC and GaN devices, cutting into the supply chain where IDMs like Cree, Infineon, Qorvo, etc. used to dominate. For example, TSMC and VIS provide foundry service of GaN-on-Si. WIN Semiconductors focuses on GaN-on-SiC sectors and business opportunities brought by 5G base stations. In addition, X-Fab, Episil Technologies and GCS also provide foundry service of SiC and GaN. The development of foundry services will drive the growth of third-generation semiconductor materials market.
About TrendForce
TrendForce is a global provider of the latest development, insight, and analysis of the technology industry. Having served businesses for over a decade, the company has built up a strong membership base of 435,000 subscribers. TrendForce has established a reputation as an organization that offers insightful and accurate analysis of the technology industry through five major research divisions: DRAMeXchange, WitsView, LEDinside, EnergyTrend and Topology. Founded in Taipei, Taiwan in 2000, TrendForce has extended its presence in China since 2004 with offices in Shenzhen and Beijing.
Suggested Items
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.
Standard Of Excellence: The Products of the Future
09/19/2023 | Anaya Vardya -- Column: Standard of ExcellenceIn my last column, I discussed cutting-edge innovations in printed circuit board technology, focusing on innovative trends in ultra HDI, embedded passives and components, green PCBs, and advanced substrate materials. This month, I’m following up with the products these new PCB technologies are destined for. Why do we need all these new technologies?
Experience ViTrox's State-of-the-Art Offerings at SMTA Guadalajara 2023 Presented by Sales Channel Partner—SMTo Engineering
09/18/2023 | ViTroxViTrox, which aims to be the world’s most trusted technology company, is excited to announce that our trusted Sales Channel Partner (SCP) in Mexico, SMTo Engineering, S.A. de C.V., will be participating in SMTA Guadalajara Expo & Tech Forum. They will be exhibiting in Booth #911 from the 25th to the 26th of October 2023, at the Expo Guadalajara in Jalisco, Mexico.
Intel Unveils Industry-Leading Glass Substrates to Meet Demand for More Powerful Compute
09/18/2023 | IntelIntel announced one of the industry’s first glass substrates for next-generation advanced packaging, planned for the latter part of this decade.