Energy Efficiency on a Roll
April 23, 2018 | KAUSTEstimated reading time: 2 minutes
A system that can recycle excess heat into electricity could help meet the increasing energy demands of a growing global population. KAUST researchers have now engineered a lightweight tubular system that can effectively harvest this abundant, clean source of energy that often goes to waste.
“This will help us address the energy crisis and environmental pollution,” says team leader Muhammad Hussain.
Heat is released into the environment by various sources, ranging from industrial machinery to everyday life objects that warm up during operation, such as electronic devices, household appliances and automotive exhaust pipes.
In a concentrated acid solution, the telluride–polymer film lifted off the substrate and spontaneously curled up into a tube.
Many scientists have attempted to harness this energy source by searching for materials that can create electricity through transforming thermal gradients or temperature differences between hot and cold zones of a system. However, existing thermoelectric materials remain inadequate for high-power generation.
Thermoelectrics hinge on materials that combine high electric conductivity with low thermal conductivity. In these materials, thermal gradients create heat flow, which causes charge carriers to diffuse through the material and produce an electric voltage.
“We are exploring all possible engineering options to augment and maintain the thermal gradient because it directly impacts thermoelectric power generation,” says lead author Devendra Singh. Their team has developed thermoelectric tubular structures of unprecedented length, extending the distance between hot and cold ends and increasing the thermal gradient. The tubes can easily be lengthened for future applications.
By adopting an approach used for sensors, battery technology and cellular vehicle applications, the researchers have invented freestanding thin films that spontaneously roll into seamless tubes under polymer-induced strain. The self-rolling films comprise a stable and easy-to-deposit telluride-containing thermoelectric alloy and a polymer acting as a stress layer.
First, the researchers successively deposited the telluride alloy and polymer layers on a silica-based substrate and consolidated the multilayered architecture by heat treatment. Next, they dissolved the substrate using a concentrated acid solution, causing the telluride–polymer film to lift off and curve up into a tube. “The film rolled upon release because of a stress mismatch between bilayer components,” explains Hussain.
Computer simulations revealed that the tube outperformed solid-rod and flat-slab analogues. Also, it displayed better area efficiency than the slab and competitive advantage compared to the heavier and more expensive rod. A proof-of-concept experiment demonstrated that a tube-based thermopile assembly generated power up to five microwatts for a temperature difference of 60 degrees Celsius.
The team is planning to develop arrays of so-called thermoelectric legs using the self-rolling tubes to optimize power generation.
Suggested Items
Real Time with... IPC APEX EXPO 2024: AI Implementation at Omron
04/18/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Omron Product Manager Nick Fieldhouse discuss the company's focus on AI implementation to enhance customer experience and results. They address programming challenges and how AI can help customers achieve better outcomes with less experience. Omron's AI is compatible with existing systems, facilitating easy upgrades.
Cadence Unveils Palladium Z3 and Protium X3 Systems
04/18/2024 | Cadence Design SystemsThe Palladium Z3 and Protium X3 systems offer increased capacity, and scale from job sizes of 16 million gates up to 48 billion gates, so the largest SoCs can be tested as a whole rather than just partial models, ensuring proper functionality and performance.
Real Time with... IPC APEX EXPO 2024: MYCRONIC's Evolution and New Solutions
04/17/2024 | Real Time with...IPC APEX EXPOHenry Crandall interviews Kevin Clue, the vice president of global sales for MYCRONIC's High Flex division. They discuss the company's evolution, emphasizing its strong customer relationships and its role as a versatile, turnkey solution provider. Kevin unveils new solutions launched at IPC APEX EXPO, including an AI-integrated inspection system and the A40 pick-and-place platform. The conversation also touches on the increased use of AI and deep learning.
Australian Flow Batteries and The SCHMID Group Announce Groundbreaking Memorandum of Understanding
04/17/2024 | SCHMID GroupAustralian Flow Batteries Pty Ltd (AFB), a leader in innovative energy solutions and economical, safe, and reliable power storage, and SCHMID Energy Systems GmbH a company of the German SCHMID Group, a global technology leader with a rich history in delivering innovative solutions across multiple industries including Electronics, Renewables, and Energy Storage sectors, are thrilled to announce the signing of a Memorandum of Understanding (MoU)
Ansys Joins BAE Systems’ Mission Advantage Program to Advance Digital Engineering Across US Department of Defense
04/16/2024 | ANSYSAnsys announced it is working with BAE Systems, Inc., to accelerate the adoption of digital engineering and MBSE across the Department of Defense (DoD).