Antiferromagnetic Materials Allow for Processing at Terahertz Speeds
May 25, 2018 | Johannes Gutenberg University MainzEstimated reading time: 3 minutes
Data hurtle down fiber-optic cables at frequencies of several terahertz. As soon as the data arrive on a PC or television, this speed must be throttled to match the data processing speed of the device components, which currently is in the range of a few hundred gigahertz only. Researchers at Johannes Gutenberg University Mainz (JGU) have now developed a technology that can process the data up to hundred times faster and thus close the gap between the transport and processing speeds.
Spellbound fans are glued to the screen. Yes, this could be a goal for the German national team … Oh no! Just past the post! Selected World Cup games were shown in razor-sharp clarity in ultra high definition (UHD) on domestic TV sets. For most of the time at least. Unfortunately, it is often the case that either the bandwidth of the transmission media cannot keep up with the data flow or the data simply cannot be processed fast enough. Then the picture judders or the high resolution has to be temporarily scaled down, and soccer fans have to make do with lower resolution images.
But very soon such low bandwidths could be a thing of the past. Researchers at the Czech Academy of Sciences together with their colleagues at Mainz University have discovered a way to dramatically increase data processing rates by around one hundred times up to terahertz speeds.
Ferromagnetic and antiferromagnetic memory
In general, data memory and storage rely on the use of ferromagnetic materials. However, these are associated with two drawbacks. Firstly, the areal density and, thus, the storage capacity of these materials is restricted as they necessarily reach natural limits. This is because each bit of information is stored in a kind of tiny bar magnet, each of which represents a 0 or a 1 depending on its alignment. But if these bar magnets are placed too close together, they begin to influence each other. The second problem is that there are also restrictions on the speeds with which data can be written to this type of storage medium. It is not possible to go faster than gigahertz rates. Otherwise it would require immense energy.
But this is not the case with antiferromagnetic memories. They can be written to at a much higher density because in these the bar magnets are always aligned alternately and so have no effect on each other. This means they can store considerably more data. And they allow much faster writing speeds.
Antiferromagnetic memory allows for terahertz processing rates
"If you want to send information, such as moving images of a soccer match, you send this in the form of light that can be transmitted by fiber-optic cables," explained Professor Jairo Sinova, Head of INSPIRE, the Interdisciplinary Spintronics Research group at Johannes Gutenberg University Mainz. "As this is possible at frequencies in the terahertz range, this happens extremely rapidly. At present, the reception speed has to be slowed down to be processed by the computer or television because these devices process and store data using electricity-based techniques, and the speed these operate at is just a few hundred gigahertz. Our antiferromagnetic memory concept is now capable of working directly with data sent at rates in the terahertz range." This means the signal no longer has to be slowed down by the device. Instead it can also be processed at terahertz speeds by the computer or TV.
The team of scientists carried out the initial research back in 2014. They passed an electric current through the antiferromagnets and were thus able to appropriately align the tiny storage units. They originally used a cable for this, a rather slow connection method. "Instead of the cable we use now a short laser pulse to induce an electric current. This current aligns the bar magnets, in other words, their spin moments," said Sinova. Instead of using cables the new memory thus works wirelessly, and instead of requiring direct electric current, the effects are now generated using light. Thanks to this, the researchers were able to dramatically increase speeds, thus meeting the requirements necessary to enable future users to view judder-free, ultra-high definition images.
Suggested Items
Koh Young Showcases Award-winning Inspection Solutions at SMTconnect with SmartRep in Hall 4A.225
04/25/2024 | Koh Young TechnologyKoh Young Technology, the industry leader in True 3D measurement-based inspection solutions, will showcase an array of award-winning inspection and measurement solutions at SMTconnect alongside its sales partner, SmartRep, in booth 4A.225 at NürnbergMesse from June 11-13, 2023. The following offers a glimpse into what Koh Young will present at the tradeshow:
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Real Time with... IPC APEX EXPO 2024: Industrial Quality Solutions from Zeiss
04/23/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Herminso Gomez of Zeiss Group discuss the company's industrial quality solutions, with a focus on X-ray technology. Zeiss provides a range of microscopy options and Herminso highlights the advantages of X-ray technology for aerospace, medical, and consumer electronics sectors.
Altair Acquires Cambridge Semantics, Powering Next-Generation Enterprise Data Fabrics and Generative AI
04/22/2024 | AltairAltair a global leader in computational intelligence, acquired Cambridge Semantics, a modern data fabric provider and creator of one of the industry’s leading analytical graph databases.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/19/2024 | Marcy LaRont, PCB007 MagazineFor my must-read picks of the week, I’m highlighting Parker Capers, a young professional seeking employment, solid counsel from Dan Beaulieu on what your post-show plan should look like, more information and insight on “chiplets” and the need for secure data transfer standards from columnist Preeya Kuray, as well as Matt Stevenson’s design for reality wisdom. It’s a reminder to download one of our newest books (there are several) you don't want to miss if you are an assembler.