Multiple Lasers Could be Replaced by a Single Microcomb


Reading time ( words)

Every time we send an e-mail, a tweet, or stream a video, we rely on laser light to transfer digital information over a complex network of optical fibers. Dozens of high-performance lasers are needed to fill up the bandwidth and to squeeze in an increasing amount of digital data. Researchers have now shown that all these lasers can be replaced by a single device called a microcomb.​

A microcomb is an optical device that generates very sharp and equidistant frequency lines in a tiny microphotonic chip. This technology was developed about a decade ago and is now reaching a maturity level that enables new applications, including lidar, sensing, timekeeping and of course optical communications.

The soul of a microcomb is a tiny optical cavity that confines laser light in space. Therefore, this technology provides a fantastic playground to explore new nonlinear physical phenomena. These conditions have now been utilised by researchers at Chalmers University of Technology, Sweden, in cooperation with researchers at Purdue University, USA. Victor Torres Company (to the right), Associate Professor at Chalmers, is one of the authors of a paper that was recently published in the journal Nature Communications.

“We observed that the optical frequencies of the microcomb interfered destructively over a short period of time, thus providing the formation of a wave inside the cavity that resembled a ‘hole’ of light. The interesting aspect of this waveform is that it yielded a sufficient amount of power per frequency line, which was essential to achieve these high-performance experiments in fiber communication systems”, says Victor Torres Company.

The physical formation of these “dark” pulses of light is far from being fully understood, but the researchers believe that their unique properties will enable novel applications in fiber-optic communication systems and spectroscopy.

“I will be able to explore these aspects thanks to the financial support of the European Research Council (ERC)”, says Victor Torres Company. “This is a bright start to better understand the formation of dark pulses in microresonators and their potential use in optical communications. The research could lead to faster and more power-efficient optical communication links in the future.”

The results are the fruit of a collaborative effort between researchers at the School of Electrical and Computer Engineering at Purdue University, who fabricated the samples, and the group of Professor Peter Andrekson at the Photonics Laboratory at Chalmers, which hosts world-class experimental facilities for fiber-optic communications research.

“Our findings do not represent the first demonstration of a microcomb in fiber communications, but it is the first time that the microcomb has achieved a performance compatible with the strong demands of future communication systems”, says Peter Andrekson, who is also one of the co-authors of the paper.

The main author is Attila Fülöp, who defended his doctoral thesis “Fiber-optic communications with microresonator frequency combs” at the Photonics Laboratory in April.

“Working with the microcomb and this experiment has been a great experience. This proof-of-concept demonstration has allowed us to explore the requirements for future chip-scale data transmitters while at the same time proving the potential of this very exciting dark pulse comb technology”, he says.

Share

Print


Suggested Items

Intelligent Healing for Complex Wounds

05/21/2019 | DARPA
Blast injuries, burns, and other wounds experienced by warfighters often catastrophically damage their bones, skin, and nerves, resulting in months to years of recovery for the most severe injuries and often returning imperfect results.

Space Communications and Navigation: Supporting Exploration

12/10/2018 | NASA
NASA spacecraft have studied Earth and the surrounding universe for more than 60 years, making ground-breaking discoveries and enabling human exploration. From hundreds, thousands and millions of miles away, these spacecraft must send their critical information back to Earth and the scientists who can use it.

What’s Coming in 3D Printing Technology in 2018

12/27/2017 | Cullen Hilkene, 3Diligent
First, the arrival of extrusion metal printing. Today's extrusion printers are the most prevalent and, arguably, user-friendly 3D Printers in the market. Now, after years of there being zero metal extrusion printers, there will be two in the new year from Desktop Metal and Markforged. These technologies promise new materials and a higher degree of user friendliness for metal printing.



Copyright © 2019 I-Connect007. All rights reserved.