Employing AI and Automation to Map Out and Make Molecules
June 25, 2018 | DARPAEstimated reading time: 3 minutes
Chemical innovation plays a key role in developing cutting-edge technologies for the military. Research chemists design and synthesize new molecules that could enable a slew of next-generation military products, such as novel propellants for spacecraft engines; new pharmaceuticals and medicines for troops in the field; lighter and longer-lasting batteries and fuel cells; advanced adhesives, coatings and paints; and less expensive explosives that are safer to handle. The problem, however, is that existing molecule design and production methods rely primarily on experts’ intuition in a laborious, trial-and-error research process.
DARPA’s Make-It program, currently in year three of a four-year effort, is developing software tools based on machine learning and expert-encoded rules to recommend synthetic routes (i.e., the “recipe” to make a particular molecule) optimized for factors such as cost, time, safety, or waste reduction. The program seeks to free chemists so that they may focus their energy on chemical innovation, rather than testing various molecular synthesis pathways. The program also is developing automated devices that uniformly and reproducibly create the desired chemical based on the software-generated recipe – this one-device, many-molecules concept is a departure from the traditional dedicated reactors in chemical production. Make-It research teams have recently demonstrated significant progress toward fully automated rapid molecule production, which could speed the pace of chemical discovery for a range of defense products and applications.
“A seasoned research chemist may spend dozens of hours designing synthetic routes to a new molecule and months implementing and optimizing the synthesis in a lab,” said Anne Fischer, program manager in DARPA’s Defense Sciences Office. “Make-It is not only freeing chemists to expend brain power in other areas such as molecular discovery and innovation, it is opening chemical synthesis and discovery to a much broader community of scientific researchers who will benefit from faster development of new molecules.”
Biologists needing molecules for their research would be able to produce them on-demand in custom-sized quantities rather than buying molecules in bulk from a chemical supplier and disposing the excess, Fischer said. One could imagine similar gains across many technological areas – anywhere small molecules are needed for research and development could benefit.
A major benefit of automated chemical synthesis is that it creates reproducible procedures, which democratizes and accelerates production. A drawback with existing non-automated approaches is that seemingly negligible changes – e.g., how fast a reaction is stirred or slightly different temperature conditions – can have a big impact on the purity and yield of the chemicals produced. This leads to lab-to-lab variability and difficulty reproducing prior-reported syntheses.
“We’re essentially coding the chemical synthesis process,” Fischer said. “This promises to assure reproducibility to exacting standards, no matter where you produce it. Because the routes are implemented with software-based instructions, any Make-It synthesis device should produce chemicals with precisely the same make-up every time.”
Additionally, automation provides a safer, cleaner, and more secure process since chemists do not need to physically handle dangerous chemicals, such as those used to develop new explosives for the military. Make-It synthesis machines require low solvent volumes, which results in less lab waste.
Make-It is achieving success due to its multidisciplinary focus with a talented group of researchers, combining computer science, organic chemistry, and chemical engineering expertise to address three areas: automated molecule design; automated synthesis, or production; and rapid reaction screening.
The Massachusetts Institute of Technology (MIT), SRI International, and Grzybowski Scientific Inventions (GSI) are exploring different approaches for developing software to automatically design various chemical route options. GSI’s molecular route optimization software is now commercially available. MIT and SRI are also developing hardware to synthesize molecules.
The University of Glasgow is developing software to design and 3-D print small, portable reactors to provide manufacturing of specific molecules “on-the-go.” Such disposable or recyclable reactors could enable much lower cost synthesis of high value, niche-area products, particularly in austere locations.
In the rapid reaction screening focus area, Purdue University and Boston University are exploring methods to build, understand, and utilize large data sets of chemical reactions to train machine-learning algorithms so they can quickly design novel molecule pathways.
“What’s exciting about Make-It is the prospect of being able to make any molecule,” Fischer said. “We’ve already shown in DARPA’s Pharmacy on Demand effort in the Battlefield Medicine program that an automated flow-chemistry machine can produce common pharmaceuticals on demand in austere locations, obviating the need for transporting and stockpiling key medicines for our troops in forward-deployed environments. Now we’ve opened up rapid chemical innovation to address not just pharmaceuticals but all areas of defense.”
Next steps in the program include integrating real-time characterization of the synthesis process through analytical instrumentation and developing more complex molecules.
Suggested Items
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.