Liquid Microscopy Technique Reveals New Problem With Lithium-Oxygen Batteries
July 24, 2018 | UICEstimated reading time: 2 minutes
Using an advanced, new microscopy technique that can visualize chemical reactions occurring in liquid environments, researchers have discovered a new reason lithium-oxygen batteries — which promise up to five times more energy than the lithium-ion batteries that power electric vehicles and cell phones — tend to slow down and die after just a few charge/discharge cycles.
“What we were able to see for the first time is that lithium peroxide develops in the liquid electrolyte of lithium-oxygen batteries, and is a contributor to the slow down and ultimate death of these batteries,” said Reza Shahbazian-Yassar, associate professor of mechanical and industrial engineering in the University of Illinois at Chicago College of Engineering and lead author of the paper. “This is a newly discovered reason why these promising batteries have such a steep drop off in efficiency and yield after relatively few charge/discharge cycles.”
Lithium-oxygen batteries have been tantalizing to battery researchers for years because of their potential high energy density. But they tend to slow down and stop working relatively quickly compared to other batteries. One of the reasons for this loss of power is that a byproduct of the chemical reactions that take place inside the battery – lithium peroxide — builds up on the electrodes of the battery. The coated electrodes can no longer function efficiently and chemical reactions that produce energy ultimately stop.
But now, Shahbazian-Yassar and his colleagues, using a new transmission electron microscopy technique developed by UIC engineering graduate students Kun He and Yifei Yuan, have demonstrated at the nanometer level, that lithium peroxide also forms in the battery’s liquid electrolyte component, further slowing chemical reactions.
“Knowing that lithium peroxide is building up in the electrolyte itself is a very important finding,” Shahbazian-Yassar said. “Now, we can start to come up with ideas and designs that either prevent this from happening or do something to maintain the proper functioning of the electrolyte so it doesn’t interfere with the battery’s operation, and we can use the new liquid microscopy technique to see if we are moving in the right direction.”
So far, lithium-oxygen batteries have only existed as lab-based prototypes, with mass-produced lithium-oxygen batteries for public or commercial use still a long way off, Shahbazian-Yassar said. “There are many problems that need to be overcome with lithium-air batteries before they can get into mainstream use, but knowing exactly what the issues are is a big first step towards the commercialization of these extremely high energy density batteries.”
Kun He, Yifei Yuan, Tara Foroozan and Boao Song of the UIC College of Engineering; and Xuanxuam Bi, Khalil Amine and Jun Lu of Argonne National Laboratory are co-authors on the paper.
Suggested Items
ASMC 2024 to Showcase AI, Smart Manufacturing and Sustainability to Advance Chip Industry Manufacturing Expertise
03/27/2024 | SEMIMore than 125 experts will offer insights into the latest semiconductor manufacturing strategies and methodologies as hundreds of industry stakeholders gather at the 35th annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC 2024), May 13-16 in Albany, New York.
IPC APEX EXPO 2024: LPKF—Debunking Depaneling Industry Perceptions
03/27/2024 | Nolan Johnson, I-Connect007In this audio interview, listen to Jake Benz discuss advances in laser depaneling at LPKF. Thanks to advances in laser technology, perceptions about laser depaneling are changing from a low-speed, specialized process to a high volume process suitable for production manufacturing. Benz elaborates on some of the development and engineering that went into creating their latest, most capable depaneling machines.
Seeking Employment: Meet Gary Turner
03/25/2024 | Barry Matties, I-Connect007Meet Gary Turner, a recent graduate from the University of Texas at Dallas with a bachelor’s degree in mechanical engineering and a master’s in material science and engineering. He is currently seeking employment in the industry. The following interview will allow you to learn about Gary and see if he might be a good candidate for a position you are looking to fill.
The Challenges, Opportunities, and Future Specialties of PCB Design
03/19/2024 | Stephen V. Chavez, Siemens EDAWhat were once specialties have become more generalized over time—PCB designers must learn about design automation, signal integrity (SI), electromagnetic compatibility (EMC), complex high-speed design, mechanical design, and manufacturability/producibility. Design engineers must learn about layout, simulation, and supply chains—and in their place new specialties have emerged, like multi-gigabit SerDes channel design, advanced manufacturing, IoT, and multi-physics system verification.
Siemens, NVIDIA Expand Collaboration on Generative AI for Immersive Real-time Visualization
03/19/2024 | PRNewswireSiemens announced that it will deepen its collaboration with NVIDIA to help build the industrial metaverse. Siemens is bringing immersive visualization powered by new NVIDIA Omniverse Cloud APIs to the Siemens Xcelerator platform, driving increased use of AI-driven digital twin technology.