Once a Performance Barrier, this Material Quirk Could Strengthen Our Telecommunication Connections
August 22, 2018 | Drexel UniversityEstimated reading time: 4 minutes
Researchers who study and manipulate the behavior of materials at the atomic level have discovered a way to make a thin material that enhances the flow of microwave energy. The advance, which could improve telecommunications, sheds new light on structural traits, generally viewed as static and a hindrance, that, when made to be dynamic, are actually key to the material’s special ability.
Image Caption: Artist’s top-view rendering of a domain wall-variant material featuring a diffuse boundary separating aligned-dipole regions in a ferroelectric crystal film. Tunable, resonant fluctuations of these two-dimensional defects enable reduction of microwave radio frequency dielectric losses to beyond the crystal’s intrinsic limit. (Graphic courtesy of Felice Macera).
The discovery, reported in the journal Nature, shows how domain walls — the naturally occurring boundaries, separating atoms with different directions of relative displacement, that create dipoles within a material — could actually be an entryway for accessing a much wider range of electromagnetic frequencies. And this access could one day expand the range of frequencies used as communications channels.
In the paper, researchers from Drexel University, Bar-Ilan University in Israel, the University of California at Berkeley, the University of California at Santa Barbara, the Carnegie Institution for Science, and the University of Pennsylvania showed how a ferroelectric material can be designed in such a way that domain walls can be used to transmit microwaves with a higher degree of frequency control than the mobile devices we currently use.
“As consumer demand for mobile communications increases the available wireless spectrum is increasingly congested and new technologies are needed to create adaptive, frequency-agile antennas,” said Robert York, PhD, a professor at UC Santa Barbara and a co-author of the paper. “Tunable dielectric materials could be a potential solution.”
Using the domain walls within a material to enhance its transmission quality is a particularly unexpected approach because the presence of these boundaries tends to strongly diminish a material’s ability to pass a microwave electromagnetic field. Until now, the best film materials for transmitting electromagnetic fields in radio-frequency devices were generally considered to be single-crystal materials that do not have any permanent dipole moments — let alone domain walls.
But the research team turned this perception of domain walls on its head by creating a ferroelectric material with a high density of domain walls, that can outperform single crystals when it comes to tunability and transmission quality.
The group found that the domain walls of a thin film of barium strontium titanate, a frequently studied ferroelectric material, function like vibrating guitar strings that resonate together. Rather than absorbing or scattering microwaves, the presence of a dense, but ordered, thicket of oscillating domain walls actually improves the quality of the transmission.
“Even the best-quality bulk single crystals, without permanent, re-orientable dipoles, have higher losses at higher frequencies, due to interference caused by the vibrations of atoms in the lattice,” said Jonathan Spanier, PhD, a materials science and engineering professor in Drexel’s College of Engineering who led the research. “Film materials with permanent dipoles form domain walls, and the loss is much worse. But films that support reversible domain wall motion and their oscillating behavior surprisingly break that trend and resonate over a wide range of frequencies.”
According to the researchers, “the proximity of and accessibility among thermodynamically predicted strain-induced, ferroelectric domain wall variants to achieve gigahertz microwave tunability and dielectric loss that surpass those for the current best film devices by 1-2 orders of magnitude, attaining values comparable to bulk single crystals, but in an intrinsically tunable material,” they write in the paper.
The key to this exceptional tunability, according to co-author Zongquan Gu, PhD, a postdoctoral scientist in Spanier’s research group in the Department of Materials Science and Engineering at Drexel, is the abundance of different phases, “the ferroelectric phase transition temperature marks the onset of the permanent dipolar ordering. A peak in the dielectric susceptibility, a thermodynamic property related to the magnitude of capacitance, is a hallmark of the transition,” Gu said. “Engineering a film material to have many, more easily available ‘phases’ near the transition allows the material to attain much higher capacitance tuning with the same voltage.”
Along with Spanier, Gu, and Geoffrey Xiao, an undergraduate student at Drexel, launched theory and simulation efforts for the prediction of domain wall-rich energy landscapes to direct the production of the domain wall-rich barium strontium titanate film. With Spanier’s colleagues at Berkeley, led by Lane Martin, PhD, professor in materials science, a leader in ferroelectric domain walls film science, Gu also made and characterized the first samples of the material, using a process called strain engineering to create a dense concentration of domain walls.
From there, collaborators from Bar-Ilan University in Israel led by Ilya Grinberg, PhD, a professor of chemistry, simulated the atomic-scale dynamic behavior of the special film material at different values of temperature, strain and electric field, comparing it with that for a “perfect” ferroelectric crystal without any domain walls — which revealed the material’s exceptional behavior.
This intrinsic tunability, meaning the material’s excellent transmission abilities do not require any external, electromechanical enhancement, make it promising for use in communication devices — where efficient access to spectrum is essential.
At UC Santa Barbara, York, a professor of electrical and computer engineering, and his doctoral student Cedric Meyers, fabricated electrode test structures that enabled the measurement and analysis of material’s resonant microwave response, including its tunability.
“Tunable dielectric materials have been a focus of investigation in my group at UCSB since the late 1990s,” York said. “But despite some progress early on, we consistently ran up against limitations of the materials that were poorly understood. This work helps to better understand these limitations and to identify potential solutions.”
Suggested Items
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
Checking In With ICAPE Group
04/03/2024 | Nolan Johnson, I-Connect007ICAPE Group’s field application engineer Erik Pederson drills down on sustainability, supply chain resiliency, and what value engineering really looks like in this exclusive interview. Founded in 1999, European-based ICAPE Group provides 21 million printed circuit boards and over six million technical parts to manufacturers every month. With 30 PCB manufacturing partners globally and 50 partners providing a wide array of technical parts, ICAPE Group has operations in China, Taiwan, Thailand, South Korea, Vietnam, South Africa, Europe, Mexico, and the United States. The company also focuses on the value proposition for its customers.