New Pyroelectric System Transmits Power Wirelessly, Harvesting and Storing Energy from Heat Source
September 24, 2018 | University of MarylandEstimated reading time: 3 minutes
In our energy-hungry world, scientists have been working towards better ways to harvest power from renewable environmental resources and more easily supply electricity to small-scale devices such as those found in the internet of things (IOT) and sensor networks.
Image Caption: The integrated system for thin-film pyroelectric energy harvestin. (Illustration by Zeyu Zhang)
Waste heat is one source of energy harvesting that has great potential. Whether it comes from electric power generating plants or the refrigerator in your home, heat is a ubiquitous, abundant, and naturally replenished energy source. In recent years, researchers have been working on ways to convert heat to electricity. A phenomenon called “the pyroelectric effect” is one of the newest, and holds plenty of potential.
Both natural crystals like quartz and engineered thin films have the atomic criteria necessary for pyroelectricity, which makes them capable of converting changing temperatures into electricity. Even small changes in temperature can trigger the effect. Researchers are experimenting with using these materials as “heat engines,” and connecting them to energy storage systems.
In groundbreaking work, U.S. Army Research Laboratory (ARL) materials engineer Brendan Hanrahan (UMD MSE Ph.D. 2013), University of Maryland (UMD) Associate Professor Alireza Khaligh (ECE/ISR), and his Ph.D. students Zeyu Zhang and Chuan Shi have built a high-power-density pyroelectric generator and an integrated, high frequency, cycled pyroelectric energy storage system that can transmit heat wirelessly via lasers, then harvest electricity from the temperature changes and store it. Their new paper, “Management and storage of energy converted via a pyroelectric heat engine,” has just been published in the Elsevier journal Applied Energy.
This is the first time high-frequency-cycled pyroelectric energy conversion has been successfully combined with the ability to recharge batteries. The researchers’ management system consists of a laser beam heat source; an advanced energy converting device using a Lead Zirconate Titanate pyroelectric thin film material; a practical synchronizing power interface; and an energy storage component. The “testbed” circuit system will make it possible to test the performance of various pyroelectric thin-film materials.
Additional improvements to the circuit are forthcoming, says lead author Zeyu Zhang. “Ultra-fast temperature changes on the thin film pyroelectric device have produced challenges for the circuit design,” Zhang says, “which needs to sustain an optimized thermodynamic cycle for the material and harvest the converted energy at the same time. We have looked into different methods to tackle the problem and successfully come up with an efficient prototype that achieved high frequency (1 kHz) pyroelectric energy converted into a real battery. We expect with more advanced materials being manufactured, the energy conversion can be conducted more efficiently and will be easier to manage.”
The work was funded under the ARL Frontiers program, which selects specific technologies and accelerates their readiness level.
“ARL was looking for a partner to take interesting material property (pyroelectricity) and turn it into a practical device,” says Brendan Hanrahan. “Before this, I had developed the technology to the point where it generated real power—but it was only hooked up to lab equipment; not really making use of the power generated. We at ARL reached out to Dr. Khaligh and his group because we knew his lab could bring us to the prototype level.”
The system has shown great potential in thermal energy harvesting for small-scale distributed devices and could be further converted into a version incorporating all-passive energy harvesting. The use of a laser source enables the system to achieve wireless power transmission, a flexible way to supply power to multiple devices. In the future, sources other than lasers that feature fluctuating heat will be tested as energy sources and incorporated into the system.
Suggested Items
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
Lockheed Martin Successfully Transitions Long Range Discrimination Radar To The Missile Defense Agency
04/23/2024 | Lockheed MartinThe Long Range Discrimination Radar (LRDR) at Clear Space Force Station in Clear, Alaska, completed DD250 final acceptance and was officially handed over to the Missile Defense Agency in preparation for an Operational Capability Baseline (OCB) decision and final transition to the Warfighter. In addition, prior to this transition, the system has started Space Domain Awareness data collects for the United States Space Force.