Kingston, ADATA, and Tigo Took Top 3 Positions in Global Ranking of SSD Module Makers
October 15, 2018 | TrendForceEstimated reading time: 4 minutes

DRAMeXchange, a division of TrendForce, announces the global ranking of SSD module makers (NAND Flash manufacturers excluded) for 2017 based on the shipments of their own-branded SSD products in the channel market. Kingston, ADATA, and Tigo took the top three positions in the ranking, with market shares of 23%, 8%, and 7% respectively.
According to DRAMeXchange, the global shipments of SSD products in the channel market recorded a total of 55 million units in 2017, which represented a decrease of 3-4% compared with 2016 shipments. The total annual SSD shipments from all branded NAND Flash manufacturers (including Samsung, Toshiba, WDC, Micron, SK Hynix, Intel and so on) fell by nearly 10% YoY in 2017, whereas the total annual SSD shipments from all memory module makers grew by 2-3% YoY for the same year. Branded NAND Flash manufacturers jointly accounted for 40% of the global SSD shipments for 2017, while the other 60% was contributed by memory module makers.
The changing landscape in the SSD market is due to the undersupply of NAND Flash in 1H17, which was not eased until 2H17. Faced with the tight supply, the NAND Flash manufacturers made adjustments to their SSD product mixes and allocated more capacity to PC OEM and Server/Data Center OEM sectors, where the gross margins are higher.
In terms of the 2017 raking, Kingston secured the first place with a remarkable market share of 23%. As one of the top suppliers of flash drives and memory cards, Kingston manages to retain its advantages in the SSD sector. As for the other nine SSD module makers in the top 10 ranking, their shares were very close to each other, which indicated that the ranking may change significantly from time to time. The top 10 SSD module makers in the ranking accounted for 67% of the total SSD shipment worldwide.
ADATA Technology took the second place as it managed to expand its market share by actively exploring the potential markets other than Europe, the United States, and China. In addition, ADATA has increased the retail prices of its products together with the rising costs of NAND Flash.
Tigo’s SSD business mainly focuses on the fast-growing Chinese market, where the company deploys comprehensive product lines to expand its share and to build the brand image. Therefore, Tigo managed to take third place in the ranking despite the rising costs and undersupply of NAND Flash.
Taiwan-based Manufacturers Attach Importance to Product Mix and Profitability, While Chinese Manufacturers Focus on Expanding Market Share and Gaining Popularity
Positions in the ranking from the fourth to the tenth place were taken by manufacturers from China and Taiwan. Specifically, Transcend Information and Apacer Technology put the most focus on the Industrial SSD market with high profitability and stable orders, while Lite-On Technology has shifted its business to Enterprise SSD market to make full use of its advantages. All the three companies adopted relatively conservative sales strategies in the channel market in 2017, and took profitability as the priority in sales.
In comparison, Chinese companies tend to be more aggressive. Teclast, Galaxy, Colorful, and Sunspeed retained their advantages in the gaming sector and continued to explore the channel market in China. In addition, they have outsourced SSD assembly to reduce the production costs. With the price decline and sufficient supply of NAND Flash in 2018, these Chinese manufacturers will have a chance to improve their rankings.
It should be noted that BIWIN, the leading module maker in China, was not in the top 10 ranking because it puts more focuses on the OEM and industrial SSD sectors rather than the channel market. Longsys was not included in this ranking either, because its business is mainly OEM orders from branded Chinese memory companies, which does not meet the criteria of this ranking. Nevertheless, its OEM shipments are comparable to the top 10 SSD module makers.
Chinese Module Makers Show Great Potential; Ssd Controller Chip Makers Continue to Optimize Their Solutions
DRAMeXchange notes that Chinese module makers show great potential in the channel market, motivating SSD controller chip manufacturers to optimize their solutions in order to obtain orders from these module makers. According to DRAMeXchange, products in demand include master controller chips that fully support 64/72L 256/512Gb Flash and 64L QLC 1Tb Flash which may enter mass production in 4Q18. The product lines are expected to include SATA DRAMless as well as mid- and low-end PCIe G3 solutions.
DRAMeXchange notes that some leading module makers in China have extra specs requirements for gaming. SMI SM2258XT, Phison S11 and Marvell 88SS1120 used to be the mainstream controller chip solutions adopted by Chinese module factories in 2017. However, more competitive solutions have emerged in 2018, including Realtek RT5732DL, Maxiotek MAS0902, SAGE INIC6081 and ASolid AS2258. Particularly, ASolid aims to catch up with its major competitors, so the specs of AS2258 are almost the same as solutions by other leading module makers. This controller chip not only features SATAIII DRAMless, LDPC of Error Correction Code and Die RAID for better performance and data protection, but also supports 64/72L TLC 256Gb/512Gb Flash and 64L QLC 1Tb Flash. In addition, to meet the demand for gaming SSD, ASolid also provides the total solution of M.2 and 2.5-inch SSD, with programmable RGB-LED to realize different lighting patterns.
About TrendForce
TrendForce is a global provider of the latest development, insight, and analysis of the technology industry. Having served businesses for over a decade, the company has built up a strong membership base of 435,000 subscribers. TrendForce has established a reputation as an organization that offers insightful and accurate analysis of the technology industry through five major research divisions: DRAMeXchange, WitsView, LEDinside, EnergyTrend and Topology. Founded in Taipei, Taiwan in 2000, TrendForce has extended its presence in China since 2004 with offices in Shenzhen and Beijing.
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
Insulectro and Electroninks Sign North American Distribution Agreement
08/12/2025 | InsulectroElectroninks, a leader in metal organic decomposition (MOD) inks for additive manufacturing and advanced semiconductor packaging, today announced a strategic collaboration and distribution partnership with Insulectro, a premier distributor of materials used in printed electronics and advanced interconnect manufacturing.
Global Excellence in PCB Design: The Global Electronics Association Expands to Italy
08/07/2025 | Global Electronics AssociationIn today's rapidly evolving electronics industry, printed circuit boards (PCBs) serve as the critical backbone influencing the success, reliability, and time-to-market of countless products. Recognizing this essential role, the Global Electronics Association (formerly IPC), a worldwide leader in electronics standards, certification, and education, is now expanding its internationally acclaimed PCB design training to Italy.
Inside the AI Hardware Boom: Servers, Substrates and Advanced Packaging
08/07/2025 | Edy Yu, Printed Circuit Information, China, and Marcy LaRont, I-Connect007AI is rewriting the hardware playbook, marrying complex software and algorithms to run and improve machine and equipment operations. Sorting through, managing, and utilizing massive amounts of data takes tremendous data storage and processing power. Enter the new generation of supercomputers and data servers. The data servers being built today are not your momma’s server, as they say.
It’s Only Common Sense: Sales as a Team Sport
08/04/2025 | Dan Beaulieu -- Column: It's Only Common SenseAnyone who has played, or even watched, sports knows that it’s not just about scoring points or making big plays—it’s about everyone working together toward a common goal. Sales is no different. Too often, sales is considered an individual activity, with each salesperson striving to hit his or her targets. However, the reality is that sales works best when it’s treated as a team sport, with everyone working toward a common goal.
Nordson Corporation Announces Earnings Release and Webcast for Third Quarter Fiscal Year 2025
07/31/2025 | Nordson CorporationNordson Corporation today announced it will release third quarter fiscal year 2025 earnings on August 20, 2025, after the close of the market.