Nanotopography of an Atomic World
January 16, 2019 | Pennsylvania State UniversityEstimated reading time: 3 minutes
Physicists offer insights into the structure of atomically thin materials using nanoscale images of 2D membranes.
Nanoscale materials are at the forefront of solving some of the world’s biggest engineering challenges. With everything from super-light bicycles to quantum electronics made possible with nanotechnology, researchers are eager to tap into the vast potential of these materials.
But scaling things up from an atomic level is a monumental task, and making usable amounts of nanoscale materials continues to be a significant hurdle for materials scientists and engineers.
Now, researchers in Penn’s Department of Physics & Astronomy are paving the way for the future of nanomaterial applications by providing insights into how these thin 2D membranes form. The study from the lab of Marija Drndić, published in the journal Nano Letters, also offers a view of what these materials look like at the nanometer scale.
The study builds on previous work done by the Drndić lab and focuses on a “less attractive” form of 2D membranes. Most research in the field focuses on membranes that are comprised of a monolayer that is only one atom thick. In this study, the Drndić lab used membranes that have a mix of thicknesses. In some areas of the membrane, the thickness is only one or two atoms, while in others membranes are about 10 atoms thick.
These membranes are considered “less attractive” because they may not be ideal for applications such as electronics. However, these membranes are strong, versatile, and much easier to make in the lab. “This additional robustness can be used for applications like desalination or gas transport,” says Priyanka Thiruraman, a graduate student involved with the study.
Making this kind of porous 2D membrane requires three steps. The first is to grow the membranes on sheets of molybdenum foil by heating them to 800°C (about 1470°F) in a chamber with sulfur vapor. This process creates the 2D membrane, which is made of molybdenum bound with sulfur.
The second step is to add atomic-scale holes to the membrane using a process called acid etching. Both the growing and the etching can be finished in a single day. “You don’t need any special chemicals to make these membranes,” says Paul Masih Das, a graduate student who was the lead author of this study. “You could even make them in your basement.”
The third step is where this work goes from something you could do in your basement to cutting-edge physics research. It’s also what makes this particular study so impactful.
Using a scanning transmission electron microscope, Masih Das was able to take pictures of these membranes at an atomic scale, bringing to life the shape of these membranes through “nanotopography.” The images show the layout of individual atoms within the membrane and reveal patterns that resemble a map of atomic hills and valleys. “This level of structure, where we can see the individual atoms of these multilayer molybdenum disulfide membranes, hasn’t been seen in the related literature before,” says Drndić.
Masih Das said that these results were unexpected; they thought they would find a structure that was more uniform and grid-like. It’s unexpected results like this that drive the Drndić lab to keep exploring the potential of how these “less attractive” materials could be used in the future.
“The idea of desalination came naturally. It’s not that we planned it; it was just that for the holes that we were making for DNA sequencing applications we noticed that if they were smaller then we can filter ions. When we first published on that topic, there were not many papers at all out there. Now, all of a sudden, there are many more papers, and there’s more of a research community.”
The Drndić lab continues to study the fundamental nature of 2D membranes and other nanomaterials. “We let it grow naturally,” Drndić says about the work done in her lab. “If we see another opportunity, we might jump on it. It’s nice to have that kind of freedom, where you’re not under pressure to always justify the cost or the application. It’s nice to be able to just explore and to bump onto new things.”
Suggested Items
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.
Ventec to Launch New Bondply Dielectrics and Value-Added Services at IPC APEX EXPO 2024
03/26/2024 | Ventec International GroupVentec International Group is to reveal new products for advanced signal integrity and thermal performance, and introduce services, during IPC APEX EXPO 2024, April 9-11 on booth # 4309.
Electra Polymers Ltd Expands Manufacturing Capacity, Invests in New Facilities and Talent
03/26/2024 | Electra Polymers LtdElectra Polymers Ltd, a leading provider of coatings for the electronics industry, proudly announces a significant expansion of its manufacturing capacity for inkjet materials. The company is making substantial investments in new facilities, talent acquisition, and cutting-edge laboratory equipment to meet the increasing demand for high-performance functional inkjet materials in the market.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
03/22/2024 | Nolan Johnson, I-Connect007This week's news feed contains a bunch of big money items, as well as some interesting industrial and technology puzzles to be solved. There’s even some down-home people news from the Dallas SMTA conference held this week. Don’t overlook the latest issue of PCB007 Magazine, either. The topic is sustainability, which is becoming an ecosystem of its own.