New Residential Solar Panels Deliver Record-Breaking Efficiency
February 20, 2019 | EPFLEstimated reading time: 2 minutes
All rooftop solar panels look pretty much the same from the outside: same size, same thickness and even the same installation system. But on the inside, the solar panels developed by EPFL spin-off Insolight stand apart. They deliver yields of 29%—nearly twice as much as the others currently on the market (which have yields of 17–19%). Insolight’s panels, which were recently tested by an independent lab, use a patented optical system that concentrates sunlight on a kind of miniature photovoltaic cell normally used in satellites
Boosting Efficiency While Keeping a Lid on Costs
Studies have shown that the average yield on commercial solar panels has increased by just 3.5 percentage points since the 2000s and seemed to be reaching a plateau. But Insolight’s three founders—Mathieu Ackermann, Laurent Coulot and Florian Gerlich—wanted to push yields further and decided to try something radically different: build residential solar panels that employ the same kinds of cells used in satellites, which are very efficient but also very expensive. To keep costs down for the retail market, they developed a protective glass on which optical lenses can be placed that concentrate sunlight by some 100x and direct it to the tiny surface of the high-performance cells. That means the cells need to take up less than 0.5% of the solar panel surface. The founders also designed a mechanism that can move the cells horizontally by a few millimeters each way in order to follow sunlight throughout the day.
Because the cells occupy just a tiny fraction of the solar panel surface, Insolight’s system can even be installed on top of conventional solar panels to boost their yields. “This hybrid approach is particularly effective when it’s cloudy and the sunlight is less concentrated, since it can keep generating power even under diffuse light rays,” says Ackermann, Insolight’s CTO.
The ultra-thin system has the same look and shape as regular rooftop panels and can be installed in the same way. “The real challenge for the retail market is to increase yields without pushing costs too high, while keeping the equipment both robust and easy to install,” says Coulot, the firm’s CEO.
Insolight’s technology first set a record in lab tests two years ago, when it achieved a yield of 36%. The system has since been standardized for mass production with a 29% yield—far ahead of competitors’ 17–19% yield—as confirmed in tests by the Institute of Solar Energy at the Technical University of Madrid (IES-UPM).
The system was also tested for a full year on rooftops at an EPFL pilot site. “Our panels were hooked up to the grid and monitored continually. They kept working without a hitch through heat waves, storms and winter weather,” says Ackermann proudly.
Cutting Energy Bills by 30%
According to the founders, Insolight’s solar panels offer a better return on investment than competing solutions. “Our technology can cut household energy bills by up to 30% in sunny regions,” says Coulot. This calculation—performed according to standard industry practice—factors in the panels’ cost, useful life and yield, as well as local power costs, weather conditions, borrowing costs, and maintenance and cleaning costs.
The firm’s three founders met at EPFL and established their company at the school’s Innovation Park. Today they are in talks with several solar panel manufacturers to license their technology. “Making our panels entails a few additional steps during the assembly stage. These steps could be tacked on to the end of standard production processes,” says Coulot. The company plans to launch its first product on the market in 2022.
Suggested Items
Real Time with... IPC APEX EXPO 2024: AI Implementation at Omron
04/18/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Omron Product Manager Nick Fieldhouse discuss the company's focus on AI implementation to enhance customer experience and results. They address programming challenges and how AI can help customers achieve better outcomes with less experience. Omron's AI is compatible with existing systems, facilitating easy upgrades.
Cadence Unveils Palladium Z3 and Protium X3 Systems
04/18/2024 | Cadence Design SystemsThe Palladium Z3 and Protium X3 systems offer increased capacity, and scale from job sizes of 16 million gates up to 48 billion gates, so the largest SoCs can be tested as a whole rather than just partial models, ensuring proper functionality and performance.
Real Time with... IPC APEX EXPO 2024: MYCRONIC's Evolution and New Solutions
04/17/2024 | Real Time with...IPC APEX EXPOHenry Crandall interviews Kevin Clue, the vice president of global sales for MYCRONIC's High Flex division. They discuss the company's evolution, emphasizing its strong customer relationships and its role as a versatile, turnkey solution provider. Kevin unveils new solutions launched at IPC APEX EXPO, including an AI-integrated inspection system and the A40 pick-and-place platform. The conversation also touches on the increased use of AI and deep learning.
Australian Flow Batteries and The SCHMID Group Announce Groundbreaking Memorandum of Understanding
04/17/2024 | SCHMID GroupAustralian Flow Batteries Pty Ltd (AFB), a leader in innovative energy solutions and economical, safe, and reliable power storage, and SCHMID Energy Systems GmbH a company of the German SCHMID Group, a global technology leader with a rich history in delivering innovative solutions across multiple industries including Electronics, Renewables, and Energy Storage sectors, are thrilled to announce the signing of a Memorandum of Understanding (MoU)
Ansys Joins BAE Systems’ Mission Advantage Program to Advance Digital Engineering Across US Department of Defense
04/16/2024 | ANSYSAnsys announced it is working with BAE Systems, Inc., to accelerate the adoption of digital engineering and MBSE across the Department of Defense (DoD).