Machine Learning Could Help Scientists Invent Flexible Electronics
March 25, 2019 | University of ChicagoEstimated reading time: 3 minutes
Organic electronics could allow companies to print electronics like paper or incorporate them into clothing to power wearable electronics—if there were only better ways to control their electronic structure.
To help address this challenge, Nick Jackson, a postdoctoral fellow in the University of Chicago’s Institute for Molecular Engineering, developed a faster way of creating molecular models by using machine learning. The models dramatically accelerate the screening of potential new organic materials for electronics, and could also be useful in other areas of materials science research.
Many believe organic electronics have the potential to revolutionize technology with their high cost-efficiency and versatility, but the current manufacturing processes used to produce these materials are sensitive, and the internal structures are extremely complex. This makes it difficult for scientists to predict the final structure and efficiency of the material based on manufacturing conditions.
Shortly after Jackson began his appointment under Juan de Pablo, the Liew Family Professor in Molecular Engineering at the University of Chicago, he had the idea to tackle such problems with machine learning. He uses this technique—a way of training a computer to learn a pattern without being explicitly programmed—to help make predictions about how the molecules will assemble.
Many materials for organic electronics are built via a technique called vapor deposition. In this process, scientists evaporate an organic molecule and allow it to slowly condense on a surface, producing a film. By manipulating certain deposition conditions, the scientists can finely tune the way the molecules pack in the film.
“It’s kind of like a game of Tetris,” said Jackson, who is a Maria Goeppert Mayer Fellow at Argonne National Laboratory. “The molecules can orient themselves in different ways, and our research aims to determine how that structure influences the electronic properties of the material.”
The packing of the molecules in the film affects the material’s charge mobility, a measure of how easily charges can move inside it. The charge mobility plays a role in the efficiency of the material as a device. In order to optimize the process, collaborating with scientist Venkatram Vishwanath of the Argonne Leadership Computing Facility, the team ran extremely detailed computer simulations of the vapor deposition process.
“We have models that simulate the behavior of all of the electrons around each molecule at nanoscopic length and time scales,” said Jackson, “but these models are computationally intensive, and therefore take a very long time to run.”
To simulate entire devices, often containing millions of molecules, scientists must develop “coarser” models. One way to make a calculation less computationally expensive is to pull back on how detailed the simulation is—in this case, modeling electrons in groups of molecules rather than individually. These coarse models can reduce computation time from hours to minutes; but the challenge is in making sure the coarse models can truly predict the physical results.
This is where the machine learning comes in. Using an artificial neural network, the machine learning algorithm learns to extrapolate from coarse to more detailed models—training itself to come to the same result using the coarse model as the detailed model.
The resulting coarse model allows the scientists to screen many, many more arrangements than before—up to two to three orders of magnitude more. Armed with these predictions, experimentalists can then test them in the laboratory and more quickly develop new materials.
Materials scientists have used machine learning before to find relationships between molecular structure and device performance, but Jackson’s approach is unique, as it aims to do this by enhancing the interaction between models of different length and time scales.
Although the targeted goal of this research is to screen vapor-deposited organic electronics, it has potential applications in many kinds of polymer research, and even fields such as protein science. “Anything where you are trying to interpolate between a fine and coarse model,” he added.
Citation: “Electronic Structure at Coarse-Grained Resolutions from Supervised Machine Learning.” Jackson et al, Science Advances, March 22, 2019. Doi: 10.1126/sciadv.aav1190
Funding: Argonne Laboratory Directed Research and Development, U.S. Department of Energy
A paper describing Jackson’s approach, titled “Electronic structure at coarse-grained resolutions from supervised machine learning,” was published on March 22 in Science Advances.
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).