Through Thick and Thin: Neutrons Track Lithium Ions in Battery Electrodes
April 22, 2019 | University of VirginiaEstimated reading time: 3 minutes
Lithium-ion batteries are expected to have a global market value of $47 billion by 2023. They are used in numerous applications, because they offer relatively high energy density (storage capacity), high operating voltage, long shelf life and little “memory effect”—a reduction in a rechargeable battery’s maximum capacity due to incomplete discharges in previous uses.
Image Caption: Associate Professor of Chemical Engineering Gary Koenig (left) and Ph.D. student Ziyang Nie (right) are employing neutron imaging at Oak Ridge National Laboratory to probe lithium-ion battery materials and structures. Credit: ORNL/Genevieve Martin
However, factors such as safety, charge-discharge cycling and operating life expectancy continue to limit the effectiveness of lithium-ion batteries in heavy-duty applications, such as for powering electric vehicles.
Chemical engineering researchers from the University of Virginia School of Engineering are employing neutron-imaging techniques at Oak Ridge National Laboratory to probe lithium-ion batteries and obtain insights into the electrochemical characteristics of the batteries’ materials and structures. Their research, published in the Journal of Power Sources, focused on tracking the lithiation and delithiation—or charge and discharge—processes in lithium-ion battery electrodes using thin and thick sintered samples of two electroactive materials, lithium titanate and lithium cobalt oxide.
Understanding how the lithium moves in battery electrodes is important in designing batteries that can charge and discharge at faster rates. In some batteries this is the slowest process, which means that improving the lithium movement through the electrodes could result in batteries that can be recharged much quicker.
“When electrodes are relatively thick, transport of lithium ions through the porous material and separator architecture can limit charge and discharge rates,” said Gary Koenig, an associate professor of chemical engineering at UVA Engineering. “To develop methods of improving lithium ion transport through an electrode’s porous void regions filled with electrolyte, we need to first be able to track the transport and distribution of the ions within a cell during the charge and discharge processes.”
According to Koenig, other techniques such as high-resolution X-ray diffraction can provide detailed structural data during electrochemical processes, but this method typically averages relatively large volumes of the material. Similarly, X-ray phase imaging can visualize salt concentrations in battery electrolytes, but the technique requires a special spectrochemical cell and can only access composition information between the electrode regions.
To obtain detailed information across a wider area, the researchers conducted their studies using neutrons at the cold neutron imaging beamline at Oak Ridge’s High Flux Isotope Reactor.
“Lithium has a large absorption coefficient for neutrons, which means that neutrons passing through a material are highly sensitive to its lithium concentrations,” said Ziyang Nie, lead author and graduate student in Koenig’s group. “We demonstrated we could use neutron radiographs to track in situ lithiation in thin and thick metal oxide cathodes inside battery cells. Because neutrons are highly penetrating, we did not have to build custom cells for the analysis and were able to track the lithium across the entire active region containing both electrodes and electrolyte.”
Comparing the lithiation process in thin and thick electrodes is essential to aid understanding of the effects of heterogeneity—local variations in mechanical, structural, transport and kinetic properties—on battery life and performance. Local heterogeneity can also result in non-uniform battery current, temperatures, state of charge and aging. Typically, as the thickness of an electrode increases, so do the detrimental effects of heterogeneity on battery performance. Yet, if thicker anodes and cathodes could be used in batteries without impacting other factors, it would help increase energy storage capacities.
For the initial experiments, the thin electrode samples had thicknesses of 0.738 mm for lithium titanate and 0.463 mm for lithium cobalt oxide, while the thick lithium titanate and lithium cobalt oxide samples were 0.886 mm and 0.640 mm, respectively.
“Our immediate goal is to develop a model to help us understand how modifying the structure of an electrode, such as changing how the material is oriented or distributed, could improve ion transport properties,” Koenig said. “By imaging through each sample at different points in time, we were able to create 2-D maps of lithium distribution. In the future, we plan to rotate our samples within the neutron beam to provide 3-D information that will reveal in more detail how heterogeneity impacts ion transport.”
About the High Flux Isotope Reactor and Oak Ridge National Laboratory
The High Flux Isotope Reactor is a Department of Energy Office of Science User Facility. UT-Battelle manages Oak Ridge National Laboratory for the department’s Office of Science. The Office of Science is the single largest supporter of basic research in the physical sciences in the United States and is working to address some of the most pressing challenges of our time.
Suggested Items
ASMC 2024 to Showcase AI, Smart Manufacturing and Sustainability to Advance Chip Industry Manufacturing Expertise
03/27/2024 | SEMIMore than 125 experts will offer insights into the latest semiconductor manufacturing strategies and methodologies as hundreds of industry stakeholders gather at the 35th annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC 2024), May 13-16 in Albany, New York.
IPC APEX EXPO 2024: LPKF—Debunking Depaneling Industry Perceptions
03/27/2024 | Nolan Johnson, I-Connect007In this audio interview, listen to Jake Benz discuss advances in laser depaneling at LPKF. Thanks to advances in laser technology, perceptions about laser depaneling are changing from a low-speed, specialized process to a high volume process suitable for production manufacturing. Benz elaborates on some of the development and engineering that went into creating their latest, most capable depaneling machines.
Seeking Employment: Meet Gary Turner
03/25/2024 | Barry Matties, I-Connect007Meet Gary Turner, a recent graduate from the University of Texas at Dallas with a bachelor’s degree in mechanical engineering and a master’s in material science and engineering. He is currently seeking employment in the industry. The following interview will allow you to learn about Gary and see if he might be a good candidate for a position you are looking to fill.
The Challenges, Opportunities, and Future Specialties of PCB Design
03/19/2024 | Stephen V. Chavez, Siemens EDAWhat were once specialties have become more generalized over time—PCB designers must learn about design automation, signal integrity (SI), electromagnetic compatibility (EMC), complex high-speed design, mechanical design, and manufacturability/producibility. Design engineers must learn about layout, simulation, and supply chains—and in their place new specialties have emerged, like multi-gigabit SerDes channel design, advanced manufacturing, IoT, and multi-physics system verification.
Siemens, NVIDIA Expand Collaboration on Generative AI for Immersive Real-time Visualization
03/19/2024 | PRNewswireSiemens announced that it will deepen its collaboration with NVIDIA to help build the industrial metaverse. Siemens is bringing immersive visualization powered by new NVIDIA Omniverse Cloud APIs to the Siemens Xcelerator platform, driving increased use of AI-driven digital twin technology.