Robots to the Rhino Rescue
May 6, 2019 | UC San DiegoEstimated reading time: 4 minutes
The critically endangered northern white rhino might have more of a chance thanks to a partnership between the University of California San Diego and San Diego Zoo Global.
With just two northern white rhinos remaining in the world, both of whom are female, scientists are racing against the clock to rescue the species from the brink of extinction. Decades of poaching and habitat loss have led to their dramatic decline. Hope for their survival now rests on scientists’ ability to develop innovative methods for repopulating the species.
Enter a flexible, snakelike robot that could make it easier for zoologists to perform artificial insemination and embryo transfer on rhinos. That’s the type of tool that San Diego Zoo Global researchers and UC San Diego roboticists have teamed up to create. They are currently seeking crowdfunding to help design and build the robot.
“It’s essentially a long, thin catheter that can be steered through a rhino’s cervix to deliver a specimen to the uterus,” said Michael Yip, a professor of electrical and computer engineering at UC San Diego.
This may at first sound straightforward, but navigating a female rhino’s reproductive anatomy is incredibly complicated. “The rhino cervix is very large and tortuous,” said Barbara Durrant, who serves as Henshaw endowed director of reproductive sciences at San Diego Zoo Global. It has a series of twists and turns like switchbacks on a steep mountain road. This goes on for 8 to 12 inches. Add to that a fairly long vagina plus the uterine body leading up to the uterine horn, and that totals up to 27 inches worth of rhino anatomy to get through before depositing semen or an embryo.
To make their way through this labyrinth, Durrant’s team currently uses a stainless steel catheter, 5 millimeters in diameter, with a 45-degree bend at the end. They have to guide this through the rhino cervix by hand. “It’s difficult and requires a bit of manipulation to negotiate and twist this through gently, so it doesn’t damage the cervical tissue,” Durrant said.
This technique has worked so far for doing artificial insemination. It’s typically performed when a female rhino’s estrogen levels are high, which causes her cervical tissue to soften and open.
But it gets even trickier when researchers have to do an embryo transfer. This procedure is usually done later in the rhino’s cycle when her progesterone levels are high. That causes her cervix to stiffen and close. “So we can’t use anything that’s rigid,” Durrant said.
The solution that Durrant and her team were looking for happened to be just 30 miles away. At UC San Diego, Yip and his Advanced Robotics and Controls Lab were already at work building flexible robotic catheters. These are two to three-millimeter-diameter robots, measuring a couple meters in length, that can be shaped and maneuvered through complex spaces deep in the body with high precision.
Because neither of the remaining northern white rhino females are able to carry a pregnancy, Durrant’s team will use the robotic catheter on a related subspecies, the southern white rhino. The plan is to first create northern white rhino eggs and sperm using stem cells from previously collected frozen cell lines, then fertilize them to generate northern white rhino embryos. Researchers would then use the robot to implant the resulting embryos in surrogates.
“The ultimate goal is to produce a self-sustaining herd of northern white rhinos, first in captivity and then back into the wild,” Durrant said. “That’s still many, many years down the line, but we have excellent collaborators both here and around the world that are working with us and helping us move steadily in that direction.”
Yip’s original plan was to develop the flexible robotic catheters for human use in procedures like colonoscopies. But when Durrant learned of Yip’s technology, she saw a perfect opportunity for collaboration and reached out. Yip invited her to visit his lab, and after seeing how useful the robots could be for the zoo’s work, a partnership was born.
“As we were talking, we started realizing some of the surgical robotics that we were developing for humans could potentially be translated to the conservation of endangered animals,” Yip said. “And with the San Diego Zoo essentially in our backyard, this presented a great opportunity to work closely together.”
Yip’s robot can snake through extremely complicated canals, like the rhino’s cervix, more easily and gently than conventional tools. To flex back and forth, it uses a series of tendons running along its length. Pulling on a tendon on the left side of the device would make it turn left. Pulling on a tendon on another side would make it turn another direction.
“You can basically marionette the device to curve into any shape you want,” Yip said. “And you can control it to make very fine, delicate movements so that procedures could be done in the animal safely and non-traumatically.”
The robot will be equipped with a small camera head at the tip to help an operator see where it’s going. It will also have a channel for delivering its cargo—semen or an embryo—to the uterus.
“At the end of the day, I hope that technologies like this can be used to both repopulate critically endangered species and counter some of the unfortunate human poaching that has been going on around the world,” Yip said.
Suggested Items
What Do You Know About PCB Manufacturing?
01/11/2024 | I-Connect007 Editorial TeamWhat manufacturing concepts are designers missing? We posed this question to Tony Bell, division manager of San Diego PCB Design, which was acquired by APCT in April 2023 and continues to operate under its original name, although with plans to transition to its official new name of APCT Design. Tony has experience in PCB design, fab, assembly, and test, so we asked him what PCB designers need to know about manufacturing. He said the need for designers to continue learning about fab and assembly processes throughout their careers, and why asking questions is not bothersome, it’s necessary for the job.
Saab Completes Acquisition of CrowdAI in the U.S.
09/08/2023 | SaabSaab’s capabilities are enhanced through proactive acquisitions and strategic partnerships in emerging and disruptive technologies such as AI and machine learning.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
08/04/2023 | Andy Shaughnessy, Design007 MagazineThis week, we have news about APCT’s acquisition of San Diego PCB Design, and PCBAA’s continued push to impress upon Congress the need to support electronics manufacturing in the U.S. Steve Williams breaks down the details behind Lean manufacturing, TQM and Six Sigma. Columnist Tim Haag explains how he learned to design advanced and complex PCBs. And Nolan Johnson has a great interview with Daniel Barish of Celanese, who discusses some of the company’s latest low-temperature co-fired ceramics and their advantages.
APCT Acquires San Diego PCB Design
08/02/2023 | APCTAPCT, a custom manufacturer of advanced technology printed circuit boards, has completed the acquisition of San Diego PCB Design (“San Diego PCB”). APCT, headquartered in Santa Clara, California, is a portfolio company of Industrial Growth Partners.
American Standard Circuits to Exhibit at the International Microwave Symposium 2023
06/05/2023 | American Standard CircuitsPrinted circuit board fabricator, American Standard Circuits will be exhibiting this year’s International Microwave Symposium (IMS 2023) to be held June 11-17 at the San Diego Convention Center in San Diego, California.