Smart Pill Bottle Keeps Drugs Safe
May 7, 2019 | KAUSTEstimated reading time: 2 minutes
A smart pill bottle that sends wireless alerts when it detects tampering, overdose or unsafe storage conditions is just one of many potential health applications for new sensor technology being developed by a team at KAUST.
Digital technology offers opportunities to improve traditional approaches to issues threatening human health. For example, networks of tiny wearable sensors deployed in hospitals can be used to track influenza outbreaks in real time. But the high costs associated with electronic manufacturing means that these sensors aren’t available where they’re needed most—to the low-income populations that suffer disproportionately from epidemics.
Muhammed Hussain, doctoral student Sherjeel Khan and colleagues are working to make sensors more accessible using cheaper materials. For example, they recently demonstrated that it is feasible to create temperature and humidity sensors from paper by drawing circuits with conductive ink.
The team has now developed a stretchy sensor—an anisotropic conductive tape with a range of touch-sensitive applications. Assembled by sandwiching tiny silver particles between two layers of adhesive copper tape, the new material is nonconductive in its normal state. But when pressed by a finger, the double-layered tape makes an electrical connection that sends a signal to an external reader.
“Similar devices have been used in flat panel displays,” explains Khan, “but we’ve made them simple to build and easy to use by almost anyone.”
The researchers used their technology to create a smart pill bottle to help fight the problem of prescription drug abuse. After 3D-printing a lid that uses light-emitting diodes to count the number of pills dispensed, they taped paper-based humidity and temperature sensors to its underside. The bottle was then sealed with an outer layer of conductive tape that acts as a touch sensor.
If someone attempts to break into the bottle, or the insides become dangerously moist, a flexible control module inside the bottle analyzes the signals and delivers warnings to cell phones via a Bluetooth connection. The conductive tape could be used on its own or as part of a modular sensor system, and so Hussain envisions it could help groups looking for quick tests of innovative health sensors.
This sensor development that is easy to build also opens up broader possibilities for researchers. “If you give researchers a 'do it yourself opportunity,' there is a good chance they will use it to expand the horizon of electronics and empower humanity with better technology,” Hussain adds.
Suggested Items
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources: