New Terahertz Comb for Chip-based Spectroscopy and Sensing


Reading time ( words)

Researchers use optical frequency combs — lasers that have a spectrum of equally spaced frequency lines — to precisely measure light, distance, and time.

But frequency combs in the terahertz range — radiation in the wavelength range of 30 to 300 microns —are more difficult to create, often involving elaborate laboratory set-ups that use cryogenic cooling. Such combs could be useful in detecting substances that emit spectroscopic signatures in that range, including explosives and dangerous chemical and biological agents.

Northwestern Engineering researchers have now developed a new kind of chip-based terahertz frequency comb that works at room temperature and is generated from a mid-infrared quantum cascade laser.

“This single-component solution will help enable next-generation terahertz spectroscopy systems,” said Manijeh Razeghi, Walter P. Murphy Professor of Electrical and Computer Engineering at Northwestern’s McCormick School of Engineering. “This could help improve the availability of the terahertz technology to the general public.”

The results were published June 3 in the journal Nature Communications.

This new research builds on Razeghi group’s years of research with Northwestern’s Center for Quantum Devices. In 2011 and 2014, she and her team developed the first single-mode room-temperature terahertz laser and the first room-temperature, continuous-wave terahertz laser.

The new comb-on-a-chip works by using an engineered grating dispersion – which is used to separate light into different wavelengths — and nonlinear mixing in quantum cascade lasers, and can emit up to multi-microwatts of continuous power. It has a wide frequency coverage of 2.2 to 3.3 terahertz.

The comb exhibits much less frequency noise and much more stability compared to its mid-infrared counterpart. This makes the device less sensitive to environmental perturbations.

“The key to the success of the comb is the dispersion optimization of the grating waveguide,” Razeghi said. “The giant nonlinearity of our laser design enables the comb emission without using any external optical components."

In additional to biological screening, the comb also has potential uses in medical and deep space imaging.

This work was funded by the National Science Foundation, Department of Homeland Security, Naval Air Systems Command, and NASA.

Share

Print


Suggested Items

DARPA, Santa Continue HO HO HO-liday Team-Up

12/26/2017 | DARPA
DARPA’s High-speed Optimized Handling of Holiday Operations (HO HO HO) initiative is celebrating its fourth anniversary this year, and the Agency is proud to continue its tradition of sharing breakthrough technologies to help Santa Claus and his elves more quickly and efficiently complete their holiday duties.

A Camera That Can See Unlike Any Imager Before It

09/20/2016 | DARPA
Picture a sensor pixel about the size of a red blood cell. Now envision a million of these pixels—a megapixel’s worth—in an array that covers a thumbnail.

Enabling Extreme New Designs for Optics and Imagers

08/22/2016 | DARPA
DARPA seeks engineered optical materials unconstrained by “laws” of classical optics to develop vastly smaller, lighter, and more capable devices for advanced imaging applications.



Copyright © 2019 I-Connect007. All rights reserved.