Rogers Offers Alternative Copper Option for RO4730G3 Laminates for Cost-Effective High Performance PCB Antennas & Active Antenna Arrays for 5G & IoT
June 25, 2019 | Rogers CorporationEstimated reading time: 1 minute
Rogers Corporation now offers RO4730G3 UL 94 V-0 antenna-grade laminates manufactured with standard profile electrodeposited copper foil to meet present and future performance requirements in active antenna arrays and small cells, notably in internet of things (IoT) applications as well as emerging 5G wireless systems. With the option of multiple copper foil offerings, design flexibility increases and rounds out the performance versus cost portfolio.
RO4730G3 ceramic hydrocarbon laminates were originally introduced with a standard profile low-loss LoPro copper foil option. While LoPro copper foil provides excellent passive-intermodulation (PIM) performance (typically better than -160 dBc) and has gained popularity for intermodulation (IM) sensitive, high-frequency antennas, as 5G designs evolve, PIM has become less important on some applications. RO4730G3 laminates with standard profile electrodeposited copper provide an optimum blend of price, performance, and durability.
RO4730G3 laminates provide the low dielectric constant (Dk) of 3.0 favored by antenna designers, held to a tolerance of ±0.05 through the thickness (z axis) when measured at 10 GHz. These laminates are 30% lighter than PTFE circuit materials and feature a high glass transition temperature (Tg) of better than +280°C for compatibility with automated assembly techniques. RO4730G3 circuit laminates exhibit low z-axis coefficient of thermal expansion (CTE) of 30.3 ppm/°C from -55 to +288°C for reliable plated through holes (PTHs) in multilayer circuit assemblies and are lead-free-process compatible.
About Rogers Corporation
Rogers Corporation is a global leader in engineered materials to power, protect and connect our world. With more than 180 years of materials science experience, Rogers delivers high-performance solutions that enable advanced connectivity and advanced mobility applications, as well as other technologies where reliability is critical. Rogers delivers Power Electronics Solutions for energy-efficient motor drives, vehicle electrification and alternative energy; Elastomeric Material Solutions for sealing, vibration management and impact protection in mobile devices, transportation interiors, industrial equipment and performance apparel; and Advanced Connectivity Solutions for wireless infrastructure, automotive safety and radar systems. Headquartered in Arizona (USA), Rogers operates manufacturing facilities in the United States, China, Germany, Belgium, Hungary and South Korea, with joint ventures and sales offices worldwide. For more information, visit www.rogerscorp.com.
Suggested Items
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in