Smart Materials Provide Real-Time Insight into Wearers’ Emotions
June 28, 2019 | Lancaster UniversityEstimated reading time: 3 minutes
Smart wearable technology that changes colour, heats up, squeezes or vibrates as your emotions are heightened has the potential to help people with affective disorders better control their feelings.
Researchers from Lancaster University’s School of Computing and Communications have worked with smart materials on wrist-worn prototypes that can aid people diagnosed with depression, anxiety, and bi-polar disorders in monitoring their emotions.
Wrist bands that change colour depending upon the level of emotional arousal allow users to easily see or feel what is happening without having to refer to mobile or desktop devices.
“Knowing our emotions and how we can control them are complex skills that many people find difficult to master,” said co-author Muhammad Umair, who will present the research at DIS 19 in San Diego.
“We wanted to create low-cost, simple prototypes to support understanding and engagement with real-time changes in arousal. The idea is to develop self-help technologies that people can use in their everyday life and be able to see what they are going through. Wrist-worn private affective wearables can serve as a bridge between mind and body and can really help people connect to their feelings.
“Previous work on this technologies has focused on graphs and abstract visualisations of biosignals, on traditions mobile and desktop interfaces. But we have focused on devices that are wearable and provide not only visual signals but also can be felt through vibration, a tightening feeling or heat sensation without the need to access other programmes—as a result we believe the prototype devices provide real-time rather than historic data.”
The researchers worked with thermochromic materials that change colour when heated up, as well as devices that vibrate or squeeze the wrist. Tests of the devices saw participants wearing the prototypes over the course of between eight and 16 hours, reporting between four and eight occasions each when it activated—during events such as playing games, working, having conversations, watching movies, laughing, relaxing and becoming scared.
Co-author Professor Corina Sas said: “Our prototypes capture physiological arousal. If we talk about sadness, then as this is associated with low arousal—or what we call emotional intensity—the device will most likely reflect low arousal. On the other hand, anxiety tends to be associated with high intensity arousal, so that device will most likely reflect this. The device does not differentiate between positive or negative emotions, but between high and low intensity ones.”
A skin response sensor picked up changes in arousal—through galvanic skin response, which measures the electrical conductivity of the skin—and represented it through the various prototype designs. Those smart materials which were both instant and constant and which had a physical rather than visual output, were most effective.
Muhammad added: “Participants started to pay attention to their in-the-moment emotional responses, realising that their moods had changed quickly and understanding what it was that was causing the device to activate. It was not always an emotional response, but sometimes other activities – such as taking part in exercise – could cause a reaction.
“One of the most striking findings was that the devices helped participants started to identify emotional responses which they had been unable to beforehand, even after only two days.
“We believe that a better understanding of the materials we employed and their qualities could open up new design opportunities for representing heightened emotions and allowing people a better sense of sense and emotional understanding.”
Professor Sas said: “We think there are a range of opportunities in both clinical and non-clinical settings for the devices, as most of us can benefit for being more aware and able to control or what we call regulate our emotional responses.
“The ability to be more in touch with one’s emotions and to regulate them is key for emotional well-being in general and mental health in particular.”
Suggested Items
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
Checking In With ICAPE Group
04/03/2024 | Nolan Johnson, I-Connect007ICAPE Group’s field application engineer Erik Pederson drills down on sustainability, supply chain resiliency, and what value engineering really looks like in this exclusive interview. Founded in 1999, European-based ICAPE Group provides 21 million printed circuit boards and over six million technical parts to manufacturers every month. With 30 PCB manufacturing partners globally and 50 partners providing a wide array of technical parts, ICAPE Group has operations in China, Taiwan, Thailand, South Korea, Vietnam, South Africa, Europe, Mexico, and the United States. The company also focuses on the value proposition for its customers.