Living on the Edge: How a 2D Material Got Its Shape

Reading time ( words)

Ever since its discovery in 2004, graphene—an atomically thin material with amazing strength and electrical properties—has inspired scientists around the world to design new 2D materials to serve a broad range of applications, from renewable energy and catalysts to microelectronics.

While 2D structures form naturally in materials like graphene, some scientists have sought to make 2D materials from semiconductors called transition metal oxides: compounds composed of oxygen atoms bound to a transition metal such as cobalt. But while scientists have long known how to make nanoparticles of transition metal oxides, no one has found a controllable way to grow these 3D nanoparticles into nanosheets, which are thin 2D materials just a few atoms thick.

Now, a team of scientists led by the Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab) has gained valuable insight into 3D transition metal oxide nanoparticles’ natural “edge” for 2D growth. Their findings were reported in Nature Materials. 

Using a liquid-phase transmission electron microscope (TEM) at Berkeley Lab’s Molecular Foundry for the experiments, co-corresponding author Haimei Zheng and her team directly observed the dynamic growth of cobalt-oxide nanoparticles in a solution, and their subsequent transformation into a flat 2D nanosheet.

“Such a 3D to 2D transformation is much like the white of an egg spreading as it fries in a pan,” said Zheng, a senior staff scientist in Berkeley Lab’s Materials Sciences Division who led the study.

In previous studies, scientists had assumed that only two major factors—bulk energy from the volume of the nanoparticles, and the nanoparticles’ surface energy—would drive the nanoparticles’ growth into a 3D shape, Zheng explained.

New Energy Comes to Light

But calculations led by co-corresponding author Lin-Wang Wang revealed another energy that had been previously overlooked—edge energy. In a faceted, rectangular nanoparticle such as a transition metal oxide nanoparticle, the edge of a facet also contributes energy—in this case, positive energy—toward the nanoparticle’s growth and shape. But in order for a transition metal oxide nanoparticle to grow into a 2D nanosheet, the surface energy must be negative.

“And it’s the balance between these two energies, one negative and one positive, which determines the shape change,” Wang said. For smaller nanoparticles, positive edge energy wins, which leads to a compact 3D shape. But when the cobalt oxide nanoparticles grow larger, they ultimately reach a critical point where negative surface energy wins, resulting in a 2D nanosheet, he explained. Wang, a senior staff scientist in Berkeley Lab’s Materials Sciences Division, performed the calculations for the study on supercomputers at Berkeley Lab’s National Energy Research Scientific Computing Center (NERSC). 

Uncovering these growth pathways, including the 3D-to-2D transition, Zheng added, provides new opportunities for the streamlined design of exotic new materials from compounds whose irregular atomic structures, such as transition metal oxides, are more challenging than graphene to synthesize into multilayered 2D devices.


Schematic illustrating the growth of 3D nanoparticles from a solution, and the 3D nanoparticles transformation into 2D nanosheets. (Credit: Haimei Zheng/Berkeley Lab)

Zheng and her team concluded that the study could not have been possible with a conventional electron microscope. By using liquid-phase TEM at the Molecular Foundry, the researchers were able to study the growth of atomically thin materials in solution by encapsulating the liquid sample in a specially designed liquid cell. The cell prevented the sample from collapsing in the high vacuum of the electron microscope.

“It would be impossible to know such a growth path without this in situ observation,” said first author Juan Yang, who was a visiting doctoral researcher at Berkeley Lab from Dalian University of Technology of China at the time of the study. “This discovery may transform our future design of materials with surface-enhanced properties for catalysis and sensing applications of the future.” 

Next Steps

The researchers' next plan to focus on using liquid-cell TEM to grow more complex 2D materials such as heterostructures, which are like sandwiches of layered materials with different properties.

“Like an architect who is inspired by the way in which an ancient giant redwood has grown, materials scientists are inspired to design ever more complex structures for energy storage,” said Zheng, who pioneered liquid-cell TEM at Berkeley Lab in 2009. “But why do they grow that way? Our strength at Berkeley Lab is that we can study them at the atomic level and watch them grow in real time and figure out the mechanisms that would contribute to the design of better materials.” 

This work was supported by the DOE Office of Science’s Basic Energy Sciences program and included research at the Molecular Foundry and National Energy Research Scientific Computing Center, which are DOE Office of Science User Facilities.

Video: Cobalt-oxide nanoparticles in a solution transform into flat 2D nanosheets; video plays 15 times faster than real time. 3D to 2D growth observed using liquid-phase transmission electron microscopy at Berkeley Lab’s Molecular Foundry. (Credit: Haimei Zheng/Berkeley Lab)




Suggested Items

Kirigami Inspires New Method for Wearable Sensors

10/22/2019 | University of Illinois
As wearable sensors become more prevalent, the need for a material resistant to damage from the stress and strains of the human body’s natural movement becomes ever more crucial. To that end, researchers at the University of Illinois at Urbana-Champaign have developed a method of adopting kirigami architectures to help materials become more strain tolerant and more adaptable to movement.

Brittle Pals Bond for Flexible Electronics

05/13/2019 | Rice University
Mixing two brittle materials to make something flexible defies common sense, but Rice University scientists have done just that to make a novel dielectric. Dielectrics are the polarized insulators in batteries and other devices that separate positive and negative electrodes. Without them, there are no electronic devices.

Beyond Scaling: An Electronics Resurgence Initiative

06/05/2017 | DARPA
The Department of Defense’s proposed FY 2018 budget includes a $75 million allocation for DARPA in support of a new, public-private “electronics resurgence” initiative. The initiative seeks to undergird a new era of electronics in which advances in performance will be catalyzed not just by continued component miniaturization but also by radically new microsystem materials, designs, and architectures.

Copyright © 2021 I-Connect007. All rights reserved.