Flexible, Transparent and Cost-Effective Lasers
October 25, 2019 | IMDEA NanocienciaEstimated reading time: 1 minute
A collaboration between IMDEA Nanociencia and Nanjing Tech University researchers produces flexible, transparent and cost-effective lasers.
The interest on plastic electronics and photonics has experienced a significant increase in the last decades due to the exceptional optical, semiconducting and mechanical properties of these materials. Plastic electronics, based on conjugated polymers, combine the benefits of cost-effective processability, compatible with large-area deposition for designing laser geometries of virtually any shape, not possible with rigid inorganic semiconductor materials. These highly luminiscent materials have been incorporated into a variety of resonator geometries, such as photonic crystals or distributed feedback (DBF) cavities, to enable optically pumped conjugated polymer lasers with emission across the visible and near-infrared spectrum.
A collaboration between IMDEA Nanociencia and Nanjing Tech University researchers have produced novel transparent, all-polymer DBF lasers. The DBF lasers make use of the periodic wavelength-scale nanostructures to backscatter photons for constructive interference. In their work, DBF structures were nanoimprinted on thermoplastic (cellulose diacetate) films and covered by highly luminescent conjugated polymers. In this way, the designed lasers present a homogeneous emission in the blue, green and red colors. Besides, the emission wavelength is tunable by bending the DBF flexible cavities.
The advantages of using thermoplastic materials such as cellulose diacetate as substrates are many: it is cheap, readily available, flexible and transparent even upon annealing. Also, cellulose diacetate is compatible with several organic solvents, it is obtained from renewable wood pulp and it is biodegradable. Researchers have demonstrated the robustness of their structures by assessing the lasing threshold values upon bending, confirming that the optical and structural properties of the active layer do not deteriorate.
The followed strategy is scalable and versatile. DBF lasers have currently a wide range of applications as mechanically flexible lasers, for instance, on lab-on-a-chip devices in biomedical analysis, information technology and sensing.
This work is a collaboration between the " Organic Photophysics and Photonics" group led by Juan Cabanillas, the "Nanostructured Functional Surfaces" group led by Isabel Rodríguez at IMDEA Nanociencia and Ruidong Xia from Nanjing Tech University, together with Daniel Granados and José C. Castro (IMDEA Nanociencia). The work has been partially funded by the Spanish Ministry of Economy, Industry, and Competitiveness, the Regional Government of Comunidad de Madrid and the Severo Ochoa Programme for Centres of Excellence in R&D, awarded to IMDEA Nanociencia.
Suggested Items
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.
Ventec to Launch New Bondply Dielectrics and Value-Added Services at IPC APEX EXPO 2024
03/26/2024 | Ventec International GroupVentec International Group is to reveal new products for advanced signal integrity and thermal performance, and introduce services, during IPC APEX EXPO 2024, April 9-11 on booth # 4309.
Electra Polymers Ltd Expands Manufacturing Capacity, Invests in New Facilities and Talent
03/26/2024 | Electra Polymers LtdElectra Polymers Ltd, a leading provider of coatings for the electronics industry, proudly announces a significant expansion of its manufacturing capacity for inkjet materials. The company is making substantial investments in new facilities, talent acquisition, and cutting-edge laboratory equipment to meet the increasing demand for high-performance functional inkjet materials in the market.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
03/22/2024 | Nolan Johnson, I-Connect007This week's news feed contains a bunch of big money items, as well as some interesting industrial and technology puzzles to be solved. There’s even some down-home people news from the Dallas SMTA conference held this week. Don’t overlook the latest issue of PCB007 Magazine, either. The topic is sustainability, which is becoming an ecosystem of its own.