Thinfilm to Energize Innovation in the Wearables and Sensor Markets With Ultrathin, Flexible, Safe Batteries


Reading time ( words)

Thin Film Electronics ASA (“Thinfilm”) today announced its updated corporate strategy focused on the design, development, and production of innovative battery solutions targeting existing market demand with differentiated solutions to power wearable devices and connected sensors. This decision follows extensive evaluation of multiple markets to determine the most commercially compelling use of the Company’s patented process technology innovations and state-of-the-art, production-scale roll-to-roll flexible electronics factory located in San Jose, California.

To address the sizeable existing and expanding applications for wearable devices and connected sensors, the Company is developing a family of rechargeable solid-state lithium battery (“SSLB”) products that are ultrathin, flexible, reliable, safe, and cost effective. Thinfilm’s facility, located in the heart of Silicon Valley, is ideally positioned to spark rapid development of differentiated products that will offer the wearable market, estimated by IDTechEx to reach $64 billion in 2020 and growing at a 9.5% CAGR through 2024, a superior alternative to today’s pouch and coin cell batteries. Thinfilm’s distinct value proposition will enable technology innovation by unleashing designers’ creativity, previously limited by the lack of flexibility inherent in existing battery technology.

Thinfilm battery solutions incorporate an innovative solid electrolyte material that enables thinner, stackable cells that can endure more charging cycles and deliver more power at sub-freezing temperatures, compared to commonly used battery technologies. Because the solid electrolyte cannot catch fire or explode, Thinfilm SSLBs can also improve the safety profile for wearable and medical applications.

“Thinfilm’s shift to the development and production of value-added battery solutions represents a more compelling application of its large-area, roll-to-roll flexible electronics manufacturing capabilities and patented process innovation. Our thin, light, flexible, safe, and cost-effective battery solutions can enable innovative and highly sought-after products in important existing markets.  We forecast significantly improved margins, at significantly lower factory utilization, compared to our previous NFC business model,” said Kevin Barber, CEO of Thinfilm.

Initially pioneered by Oak Ridge National Laboratory in the 1990s, SSLB technology is primarily used in embedded electronics applications including real-time clock and SRAM backup. However, the technology’s deployment has been limited by dependencies on rigid substrates, fragile materials, and small-scale manufacturing methods. In contrast, Thinfilm is well positioned to bring the advantages of SSLB technology to a broader market due to the Company’s unique combination of existing capabilities, including roll-based production, robust metal foil substrate handling, materials expertise, and manufacturing process knowhow.

By leveraging its core capabilities in materials and manufacturing innovation, the Company believes it can produce compelling energy storage products that provide greater battery life and improved reliability, with the form-factor flexibility to create unique battery shapes enabling sleek, comfortable end products. The Company will initially focus on key portions of the wearables and sensor markets, particularly the rapidly growing connected and wearable medical sensing market, in which continuous glucose monitoring alone is forecasted to double in volume to over 100 million units by 2023, according to IDTechEx. Beyond wearable medical sensing, Thinfilm has identified a number of additional growing applications in existing markets that are expected to provide meaningful opportunities for additional growth.

To accelerate the development of ultrathin battery technology in the San Jose factory, Thinfilm has entered into a partnership with a leading process technology development company.

Based on the Company’s decision to leverage existing intellectual property and manufacturing assets in the execution of its revised strategy, Thinfilm does not currently expect to issue warrants authorized in the October 23, 2019 Extraordinary General Meeting.

Additionally, the Company is actively working to monetize the CNECT® platform and related NFC assets and is currently evaluating offers from potential acquirers who are interested in deploying NFC solutions supported by a robust data analytics software platform.

To reflect the Company’s updated strategy, Thinfilm has launched its new corporate website at www.thinfilmsystems.com. The site outlines Thinfilm’s unique approach to battery solutions and is the new home for the Company’s corporate and investor relations information. An updated strategy presentation is available in the Investor Relations section on the Presentation & Webcasts page.

The Company has scheduled its fourth quarter financial report to be released on 20 February 2020. In addition, Thinfilm CEO Kevin Barber will present the company’s updated strategy to investors and analysts in a briefing to be held in Oslo, Norway in late February 2020. The Company will provide schedule and location details in the coming weeks.

Share

Print


Suggested Items

CES 2020: The Intelligence of Things

01/06/2020 | Nolan Johnson, I-Connect007
Show week for CES 2020 starts well ahead of the actual exhibition dates because it is huge. The organizers of CES state that there are more than 4,400 exhibiting companies and nearly three million net square feet of exhibit space. On the floor, you can find 307 of the 2018 Fortune Global 500 companies. Over the week, I-Connect007 Editors Dan Feinberg and Nolan Johnson will bring you some of the most interesting news, products, and announcements from 5G to IoT, semiconductor developments, autonomous vehicle technology, interconnect, fabrication materials, and much more.

NASA Sounding Rocket Technology Could Enable Simultaneous, Multi-Point Measurements — First-Ever Capability

10/21/2019 | NASA
NASA engineers plan to test a new avionics technology — distributed payload communications — that would give scientists a never-before-offered capability in sounding rocket-based research.

For Climbing Robots, the Sky's the Limit

07/15/2019 | NASA
Robots can drive on the plains and craters of Mars, but what if we could explore cliffs, polar caps and other hard-to-reach places on the Red Planet and beyond? Designed by engineers at NASA's Jet Propulsion Laboratory in Pasadena, California, a four-limbed robot named LEMUR (Limbed Excursion Mechanical Utility Robot) can scale rock walls, gripping with hundreds of tiny fishhooks in each of its 16 fingers and using artificial intelligence (AI) to find its way around obstacles.



Copyright © 2020 I-Connect007. All rights reserved.