NeoPhotonics Samples High Power Semiconductor Optical Amplifiers and Narrow Linewidth Lasers for Coherent Lidar Transceivers


Reading time ( words)

NeoPhotonics Corporation, a leading designer and manufacturer of advanced hybrid photonic integrated circuit based modules and subsystems for bandwidth-intensive, high speed communications networks, today announced that it is sampling high power Semiconductor Optical Amplifiers (SOAs) and Narrow Linewidth (NLW) Distributed Feedback Lasers (DFB) lasers for long range automotive Lidar (“light detection and ranging”) applications.

NeoPhotonics SOAs and NLW lasers operate in eye-safe wavelength regions, and these offerings feature 1550nm wavelength SOAs with >24 dBm (>250mW) output power along with 1550nm NLW-DFB lasers that enable automotive Lidar systems to “see” considerably farther than 200 meters, thereby significantly enhancing safety.

Current Lidar systems for autonomous vehicles use expensive discrete optical components and employ direct detection measurement of the reflected light intensity, which limits range and sensitivity.  Next generation Lidar systems will use “coherent” technology, which was pioneered by NeoPhotonics for communications networks, to greatly increase the range and sensitivity by measuring the phase of the reflected light.  Coherent Lidar systems are fabricated using chip-scale manufacturing to reduce costs and enable high volume.  

Chip scale manufacturing requires coherent Photonic Integrated Circuits (PICs) powered by low phase and intensity noise semiconductor lasers and high output power semiconductor optical amplifiers.  Narrow linewidth and low phase noise lasers enable the precise phase measurements required by coherent detection and optical amplifiers to boost the optical signal power for long reach detection.  When combined with coherent PIC receivers, high power SOA and NLW-DFB laser enable coherent Lidar transceivers for high volume manufacturing.

“Our laser components are key elements for chip-scale Lidar systems that can be manufactured in high volumes,” said Tim Jenks, Chairman and CEO of NeoPhotonics.  “Lidar architectures based on coherent technologies have the advantage of leveraging high volume, chip-scale technologies developed by NeoPhotonics for telecommunications and data center interconnect applications.  Laser components are manufactured in our internal fabs and utilize our advanced hybrid photonic integration technology for high performance and high reliability, allowing system integrators to quickly leverage coherent technology and its established manufacturing supply-chain for Lidar applications.” continued Mr. Jenks.

Share

Print


Suggested Items

NASA Awards Artemis Contract for Lunar Gateway Power, Propulsion

05/27/2019 | NASA
In one of the first steps of the agency’s Artemis lunar exploration plans, NASA announced the selection of Maxar Technologies, formerly SSL, in Westminster, Colorado, to develop and demonstrate power, propulsion and communications capabilities for NASA’s lunar Gateway.

How Mission Control Used Robotics to Successfully Restore Full Power for the Space Station

05/13/2019 | NASA
Using complex robotic work to perform critical maintenance allows astronauts to spend more time working on scientific experiments and helps develop better technologies and procedures for future human and robotic exploration beyond low-Earth orbit.

RapidScat Team Investigating Power System Anomaly

09/12/2016 | NASA
Mission managers at NASA's Jet Propulsion Laboratory, Pasadena, California, and NASA’s Marshall Space Flight Center, Huntsville, Alabama, are assessing two power system-related anomalies affecting the operation of NASA’s ISS-RapidScat instrument aboard the International Space Station.



Copyright © 2020 I-Connect007. All rights reserved.