MacDermid Alpha to Exhibit and Present at the Upcoming IMAPS Device Packaging Conference


Reading time ( words)

MacDermid Alpha Electronics Solutions, a global leader in high performance semiconductor chemistries and assembly materials, will exhibit total process solutions for emerging packaging at the IMAPS Conference, Fountain Hills, AZ, March 3−5, 2020.

MacDermid Alpha will highlight their entire portfolio of technologies from their MacDermid Enthone, Alpha, Kester, and Compugraphics brands essential to advanced semiconductor packaging and the markets it enables, such as 5G, mobile, smart automotive, high-performance computing, augmented and virtual reality, and artificial intelligence (AI). Showcased will be the recently released STAYDRY Z20 film, a unique getter which employs an active desiccant for water absorption dispersed in a flexible silicone polymer matrix. Also promoted will be the soon-to-be-released Systek UVF 100; a 2-in1 RDL via filling technology for IC substrates.

Dr. Kesheng Feng, Research Director for Metallization, will be presenting "Embedded Trace and RDL Copper Plating Process for Panel Level Packaging Applications" on Tuesday, March 3 at 3:00pm. The presentation will discuss how MacDermid Alpha is helping advanced packaging suppliers address challenges in fine line copper plating for panel level packaging designs.

MacDermid Alpha’s team of industry experts from their Circuitry and Semiconductor divisions will be available at booth #33/34 to discuss the challenges the semiconductor manufacturing sector faces as technology continues to push the limits of performance and miniaturization.

For more information on MacDermid Alpha’s semiconductor chemistries and assembly materials please visit MacDermidAlpha.com.

About MacDermid Alpha Electronics Solutions:

Through the innovation of specialty chemicals and materials under our Alpha, Compugraphics, and MacDermid Enthone brands, MacDermid Alpha Electronics Solutions provides solutions that power electronics interconnection. We serve all global regions and every step of device manufacturing within each segment of the electronics supply chain. The experts in our Semiconductor Solutions, Circuitry Solutions, and Assembly Solutions divisions collaborate in design, implementation, and technical service to ensure success for our partner clients. Our solutions enable our customers’ manufacture of extraordinary electronic devices at high productivity and reduced cycle time. Find out more at MacDermidAlpha.com.

Share

Print


Suggested Items

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.

How to Benefit From Robotic Soldering Processes

10/28/2020 | Pete Starkey, I-Connect007
Webinars are in vogue! But in Pete Starkey's experience, the master of the technical webinar with many years’ experience of delivering first-rate events is Bob Willis—electronics assembly specialist, soldering expert, and provider of training and consultancy in electronics manufacture. Here, Pete recaps Bob’s presentation on the upcoming robotic soldering experience.

Electronics Additive Manufacturing for Defense and Space

10/27/2020 | Nolan Johnson, I-Connect007
At the SMTA Additive Electronics TechXchange, Dr. Kourtney Wright spoke about Lockheed’s DoD work and explained why Lockheed is interested in additive. Nolan Johnson shares the highlights.



Copyright © 2020 I-Connect007. All rights reserved.