New OE-A Roadmap Shows How Flexible Electronics Enable Innovation
April 7, 2020 | OE-AEstimated reading time: 2 minutes
Organic and printed electronics has developed into a global market worth more than 35 billion dollars. While OLED displays currently play the biggest role, in the coming years strong growth is expected in other applications such as NFC/RFID, sensors, wearable electronics, and in the automotive and medical industry sectors. These trends are also reflected in the eighth edition of the Roadmap published by the OE-A (Organic and Printed Electronics Association), a working group within VDMA.
The revolutionary technology of organic and printed electronics is constantly opening up new fields of application and has already established itself in many areas. From Internet of Things (IoT) to Consumer Electronics and Healthcare, the Automotive industry, Smart Packaging and Buildings: Printed electronics is now applied in numerous products and industries worldwide. While a few years ago the use of printed electronics in the Automotive industry was for example limited to seat occupancy sensors and OLED taillights, the technology is now finding increasingly more applications in this sector, such as in the form of touch sensors or heating foils. The current White Paper "OE-A Roadmap for Organic and Printed Electronics" takes a closer look into the advanced maturity of the printed electronics industry. For the first time, the experts of the OE-A have compiled detailed short-, mediumand long-term forecasts for the above-mentioned industry sectors in addition to the latest developments. "We see a clear trend away from the technology push of earlier years towards an increased market pull of organic and printed electronics today," says Dr. Klaus Hecker, OE-A Managing Director.
Hybrid Systems enable new applications
Printed electronics complements classical electronics, which enables new applications by offering additional technical and design freedom. An important development identified in the OE-A Roadmap are Hybrid Systems that combine printed and classical silicon-based components. This combination can be used especially for Internet of Things, Smart Labels and also in the Healthcare sector. "Products that combine both technologies will make a major contribution to the further establishment of printed electronics on the market and the creation of new applications," explains Hecker.
Mastering challenges to further develop the industry
The White Paper also identifies challenges that still need to be overcome in order to achieve a breakthrough in other fields of application. "In recent years great progress has been made with functional materials. In the future, printed electronics will also be used increasingly on three-dimensional surfaces, as well as in clothing or as intelligent plasters on the skin. This means that materials as well as substrates and encapsulations must be stretchable. There is still a considerable need for development here," explains Hecker. In order to increase the suitability for mass production, further progress is also required in the optimization and scaling of production processes, yield, and standardization. The OE-A Roadmap is an important compass for industry, politics and science in development and product planning.
The OE-A Roadmap White Paper is now available on the OE-A website.
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).