Optical Microcomb Device May Result in Improved Telecommunications, Sensors, Clocks


Reading time ( words)

Modern communications technology increasingly relies on light to transmit data over fiber optics. And the high data rates that fuel the internet are achieved using many frequencies (colors) of light, each carrying a portion of data. The more colors, the more information that can be carried.

A team of researchers from Caltech, UC Santa Barbara, and the Swiss Federal Institute of Technology Lausanne (EPFL) have developed a new device that will lead to improved optical data transmission and could have applications ranging from communications to the miniaturization of time standards or to the search for exoplanets.

Their device converts laser light of a single frequency into an evenly spaced set of many distinct frequencies (a comb of frequencies). The resulting optical frequency microcomb is built from a single piece of silicon, in much the same way as computer chips. And its many colors can replace many separate lasers for data transmission.

For example, more than 50 separate lasers are sometimes required to generate the light signal on a single strand of optical fiber. "Using 50 lasers has a number of drawbacks," says UC Santa Barbara professor John Bowers, who led the research effort. "It's expensive, and rather inefficient in terms of power."

The optical microcomb is simpler and much smaller than a collection of individual lasers, and it is both less expensive to manufacture and uses less power.

The new device is also much easier to operate. Previously, microcombs required complex control of the input laser light frequency and power in order to activate the comb.

"The new approach makes the process as easy as switching on a room light," says co-author Kerry Vahala (BS '80, MS '81, PhD '85), Caltech's Ted and Ginger Jenkins Professor of Information Science and Technology and Applied Physics and executive officer for Applied Physics and Materials Science. This is possible because the researchers discovered a new physical operating point (a combination of power and frequency) for the combined laser and microcomb system. "The operating point eliminates additional instruments normally required to activate and control a microcomb," adds Boqiang Shen (MS '18), co-author and Caltech applied physics graduate student.

The team took advantage of the simplified operation and the chip-scale nature of the microcomb to create a match-box sized multi-frequency optical source. Other applications of the source outside of communications are also being studied by the team.

The paper describing the new technology, titled, "Integrated turnkey soliton microcombs," appears in the June 18 issue of Nature. In addition to Vahala and Shen, other co-authors from Caltech are graduate students Boqiang Shen, Heming Wang, and Lue Wu; postdoctoral scholar Qi-Fan Yang (MS '16, PhD '19); and incoming graduate student Qing-Xin Ji. Other co-authors are Lin Chang, Chao Xiang, Weiqiang Xie, Joel Guo, David Kinghorn, and John Bowers of UC Santa Barbara; and Junqiu Liu, Rui Ning Wang, Jijun He, Tianyi Liu, and Tobias J. Kippenberg (MS '00, PHD '04) of the Swiss Federal Institute of Technology Lausanne.

Funding for the research was provided by the Defense Advanced Research Projects Agency. Read the original article here.

Share

Print


Suggested Items

Additive Electronics TechXchange: NSWC Crane and Lockheed Martin Presentations

10/27/2020 | Happy Holden, I-Connect007
The Additive Electronics TechXchange this year was a virtual event. Happy Holden covers two presentations, including “Very High-Density Investigation Project” by Steve Vetter of the NSWC Crane Naval Facility and "Electronics Additive Manufacturing for Defense and Space" by Kourtney Wright, Ph.D., of Lockheed Martin Advanced Technology Center.

Understanding MIL-PRF-31032, Part 4

10/20/2020 | Anaya Vardya, American Standard Circuits
Continuing with Part 4 of the discussion on understanding the military PCB performance standard MIL-PRF-31032, Anaya Vardya explains how the next step in the process is to create four new procedures to address the unique requirements of the military.

What It Takes to Be a Milaero Supplier, Part 4

05/18/2020 | Anaya Vardya, American Standard Circuits
The decision to pursue military and aerospace (milaero) certification impacts every facet of the organization, and not every shop is prepared to make this transformation. This is the final article in a four-part series, breaking down what it takes. In Part 4, Anaya Vardya explores what it takes to be a milaero supplier in the area of manufacturing.



Copyright © 2020 I-Connect007. All rights reserved.