SEMI FlexTech Launches Three New Projects to Advance Flexible Hybrid Electronics
July 2, 2020 | SEMIEstimated reading time: 2 minutes
SEMI FlexTech announced the launch of three projects to accelerate sensor and sensor system innovations for new applications in industries including healthcare, automotive, industrial and defense.
In collaboration with the U.S. Army Research Laboratory (ARL), FlexTech, a SEMI Technology Community, will fund half of the total $2.6 million for the projects aimed at maturing the flexible hybrid electronics (FHE) technology ecosystem. Organizations leading the projects include the University of Colorado (CU), University of Washington (UW) and University of California, Los Angeles (UCLA).
Project Snapshots
The University of Colorado project is focused on integrating soft actuators and flexible electronic control circuits to demonstrate a complete soft robotic system. The project includes a demonstration of synthetic muscular hydrostat integrating electronics and soft actuator modules capable of manipulating objects. The system will mimic muscular structures such as an octopus arm or elephant trunk and will use a human-machine interface for robotic manipulation. CU will be partnering with PARC, A Xerox company on this 18-month project.
Researchers at the University of Washington will focus on an 18-month project to improve and optimize sensor design with ultra-high-resolution printed structures using the novel piezoelectric material of a TMCM MnCl3 (trimethylchloromethyl ammonium trichloromanganese). Deliverables include demonstration of large area roll-to-roll printed electronics fabrication and integration, with compact signal conditioning and wireless data transmission. This project aims to bring the high performance of high-temperature, inflexible inorganic sensors to low-temperature flexible electronics through a low-cost, fully-printed process using low-toxicity materials. The project aims to develop a novel approach to creating flexible health monitoring sensors.
UCLA will develop and demonstrate a foldable, high-resolution microdisplay on PDMS substrates by developing an ultra-high yield, scalable and low-cost mass transfer process for assembly of high-quality GaN µLEDs at 100um size for a resolution of >200 pixels per inch (PPI). The prototype will be made using heterogeneous integration of mass-transferred GaN µLED with Si CMOS driver circuitry on a common flexible organic substrate using Fan-Out-Wafer-Level Packaging. In parallel, the project will explore testing strategies for electrical characterization of µLED and process scalability and limitation. UCLA will partner with Veeco on this 18-month project.
“These groundbreaking research projects target technology advancements that are too risky for corporate R&D funding but offer the potential for high payoff,” said Melissa Grupen-Shemansky, CTO of SEMI and Executive Director of SEMI-FlexTech. “ARL relies on the SEMI FlexTech Governing Council and Technical Advisory Council to select projects that drive leapfrog advances in flexible and printed electronics. Calling upon their deep technical knowledge and experience in the field, SEMI-FlexTech members of these councils vet projects based on technology gaps in the industry.”
SEMI FlexTech is currently soliciting new project proposals via a white paper pre-proposal due July 10, 2020.
Suggested Items
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.