Tektronix Introduces S530 Series Parametric Test System
October 6, 2020 | PR NewswireEstimated reading time: 3 minutes
Tektronix, Inc., a leading worldwide provider of test and measurement solutions, today released the new Keithley S530 Series Parametric Test System with KTE 7 software and other enhancements. The S530 platform enables semiconductor fabs to add parametric test capacity for high-growth new technologies while minimizing CAPEX investment and maximizing wafers per hour efficiency. This reduced overall cost of ownership profile helps manufactures meet aggressive price pressures in competitive new markets.
Tektronix releases the new Keithley S530 Series Parametric Test System with KTE 7 software and other enhancements.
New semiconductor products based on emerging wide bandgap (WBG) technologies such as GaN and SiC offer the promise of faster switching speeds, wider temperature ranges, better power efficiency, and other benefits. To meet testing needs for these products, the KTE 7-based S530 platform boasts lab-grade measurement performance with minimal set-up and test time. High-speed, fully flexible configurations up to 1100V can evolve as new applications emerge and requirements change. This allows chip manufacturers to cost-effectively and efficiently expand into high-growth power and WBG devices (including the automotive market), with minimal test/set-up time, on a single system, and with minimal investment.
"Analog and mixed-signal semiconductor manufacturers continue to experience strong demand from new end-use applications in 5G communications, automotive, IoT, medical, green energy, and other markets," says Chris Bohn, vice president and general manager at Keithley/Tektronix. "This significant test platform update helps those customers bring new products to market more quickly and cost-effectively, while giving them the agility to adapt to new requirements in the future."
Innovations to the S530 Series maximize tester utilization over a wide product mix, and easily migrate existing test software, probe cards and other items, while offering full data correlation along with significant speed improvements. The S530-HV model enables testing up to 1100V on any pin to boost throughput by 50 percent or more over competitive systems in power and WBG applications. Chip manufacturers can test a wide mix of products with a single system, including automotive products per the IATF-16949 quality management standard. Calibration can be performed with minimal downtime in-house or through Tektronix's service organization for worldwide, high-quality, personal support.
The KTE7-based platform offers semiconductor manufacturers the easiest and most cost-effective migration path from legacy S600 and S400 systems, preserving full data correlation along with throughput improvements up to 25 percent faster than the S600.
Significant Enhancements and Industry Firsts
- Optional Testhead for the S530-HV eliminates the operator time needed to change the instrumentation, probe card, and cabling test setup when moving from low voltage (<200V) to high voltage (>200V) wafer-level tests. The testhead enables probe card compatibility with multiple models from multiple vendors for faster probe card changing and to-the-pin calibration per ISO-17025, while maintaining backward compatibility. This minimizes migration costs and protects customer investment, while supporting new requirements such as automotive standard IATF-16949.
- The S530-HV enables testing up to 1100V on any pin to boost throughput by 50 percent or more over competitive systems in power and WBG applications. Operators can connect any test resource to any test pin in any sequence to quickly and easily support production requirements without reconfiguring or re-tooling signal paths.
- KTE software compatibility greatly simplifies and speeds up the migration path from legacy systems such as the S600, achieving full correlation with up to 25 percent faster throughput.
- Built-in transient over-voltage / over-current protection prevents accidental damage to probe cards, needles, and instrumentation - which is especially critical in high speed WBG applications.
- During system calibration, the new 5880-SRU System Reference Unit automatically switches all DC and AC reference standards, thus eliminating the need to manually connect, disconnect, and reconnect. This fully automated process greatly reduces system downtime and resulting support costs when performing calibration, resulting in a lower COO profile.
Suggested Items
Lockheed Martin Successfully Transitions Long Range Discrimination Radar To The Missile Defense Agency
04/23/2024 | Lockheed MartinThe Long Range Discrimination Radar (LRDR) at Clear Space Force Station in Clear, Alaska, completed DD250 final acceptance and was officially handed over to the Missile Defense Agency in preparation for an Operational Capability Baseline (OCB) decision and final transition to the Warfighter. In addition, prior to this transition, the system has started Space Domain Awareness data collects for the United States Space Force.
US Department of Defense Selects Intel Foundry for Phase Three of RAMP-C
04/23/2024 | IntelThe U.S. Department of Defense (DoD) has awarded Intel Foundry Phase Three of its Rapid Assured Microelectronics Prototypes - Commercial (RAMP-C) program.
Real Time with... IPC APEX EXPO 2024: AI Implementation at Omron
04/18/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Omron Product Manager Nick Fieldhouse discuss the company's focus on AI implementation to enhance customer experience and results. They address programming challenges and how AI can help customers achieve better outcomes with less experience. Omron's AI is compatible with existing systems, facilitating easy upgrades.
Cadence Unveils Palladium Z3 and Protium X3 Systems
04/18/2024 | Cadence Design SystemsThe Palladium Z3 and Protium X3 systems offer increased capacity, and scale from job sizes of 16 million gates up to 48 billion gates, so the largest SoCs can be tested as a whole rather than just partial models, ensuring proper functionality and performance.
Real Time with... IPC APEX EXPO 2024: MYCRONIC's Evolution and New Solutions
04/17/2024 | Real Time with...IPC APEX EXPOHenry Crandall interviews Kevin Clue, the vice president of global sales for MYCRONIC's High Flex division. They discuss the company's evolution, emphasizing its strong customer relationships and its role as a versatile, turnkey solution provider. Kevin unveils new solutions launched at IPC APEX EXPO, including an AI-integrated inspection system and the A40 pick-and-place platform. The conversation also touches on the increased use of AI and deep learning.