CyberOptics to Showcase Metrology and Inspection Solutions at SEMICON China


Reading time ( words)

CyberOptics Corporation, a leading global developer and manufacturer of high-precision 3D sensing technology solutions, will feature the WX3000™ metrology and inspection system with Multi-Reflection Suppression™ (MRS™) sensor technology at SEMICON China, scheduled to take place March 17-19, 2021 at the Shanghai New International Expo Centre, hall N1, booth 1387 and 1325. The company also will demonstrate high-precision WaferSense® sensors for semiconductor tool setup and diagnostics.

The NanoResolution MRS sensor integrated into CyberOptics’ WX3000 system provides sub-micrometer accuracy on features as small as 25µm. While retaining its ability to reject spurious multiple reflections, it adds the ability to capture and analyze specular reflections from shiny surfaces of solder balls, bumps and pillars, allowing highly accurate inspection and 3D metrology of these critical packaging features. Complete 100 percent 3D/2D inspection and bump metrology can be accomplished 2-3X faster than alternative technologies delivering production-worthy throughput greater than 25 wafers (300mm) per hour.

“The need for high resolution, highly accurate, 100 percent inspection and metrology for wafer-level and advanced packaging continues to increase,” said Dr. Subodh Kulkarni, President and CEO, CyberOptics. “Not only does the WX3000 system provide these performance capabilities, but it provides the speed that alternative technologies lack.”

The company also will digitally demonstrate high-precision sensors that process and equipment engineers use in the front-end of the fab to speed equipment qualification, shorten equipment maintenance cycles, lower equipment expenses and optimize preventative maintenance plans. The WaferSense® Auto Resistance Sensor™ (ARS) enables real-time resistance measurements of plating cell contacts in semiconductor Electrochemical Deposition (ECD) applications, and the In-Line Particle Sensor™ (IPS) detects, monitors and enables troubleshooting of particles down to 0.1 µm in gas and vacuum lines in any areas of the fab 24/7.

About CyberOptics

CyberOptics Corporation (www.cyberoptics.com) is a leading global developer and manufacturer of high-precision 3D sensing technology solutions. CyberOptics’ sensors are used for inspection and metrology in the SMT and semiconductor markets to significantly improve yields and productivity. By leveraging its leading edge technologies, the Company has strategically established itself as a global leader in high precision 3D sensors, allowing CyberOptics to further increase its penetration of key vertical markets. Headquartered in Minneapolis, Minnesota, CyberOptics conducts worldwide operations through its facilities in North America, Asia and Europe. For more information, visit www.cyberoptics.com.

Share

Print


Suggested Items

What It Takes to Be a Milaero Supplier, Part 2

03/24/2020 | Anaya Vardya, American Standard Circuits
The decision to pursue military and aerospace (milaero) certification impacts every facet of the organization, and not every shop is prepared to make this transformation. In Part 2, Anaya Vardya focuses on what it takes to be a milaero supplier in the areas of engineering and CAM.



Copyright © 2021 I-Connect007. All rights reserved.