NASA’s BioSentinel Team Prepares CubeSat For Deep Space Flight
April 5, 2021 | NASAEstimated reading time: 2 minutes
BioSentinel gets a step closer to flight. Having completed assembly and a battery of tests, the BioSentinel team at NASA’s Ames Research Center in California’s Silicon Valley is in the final stretch of preparations to ship the spacecraft to NASA’s Kennedy Space Center in Florida for launch. BioSentinel’s deep space flight will go past the Moon and into an orbit around the Sun. It’s one of 13 CubeSats that will launch aboard Artemis I, the first flight of the Artemis program’s Space Launch System. Here, inside an anechoic chamber at Ames, quality assurance engineer Austin Bowie inspects BioSentinel’s solar array after completion of a test to determine the effects of electromagnetic spacecraft emissions on spacecraft systems.
BioSentinel will perform the first long-duration biology experiment in deep space. Its six-month science investigation will study the effects of deep space radiation on a living organism, yeast. Pictured is one of BioSentinel’s microfluidic cards that will be used to measure the impact of radiation on yeast cells housed in tiny compartments. The microfluidic system includes a dye that provides a readout of yeast cell activity with a color change from blue to pink.
BioSentinel scientist Lauren Liddell uses a microscope to count yeast cells to ensure the correct number of cells are loaded into BioSentinel’s microfluidic hardware. Because human cells and yeast cells have many similar biological mechanisms, including for DNA damage and repair, BioSentinel’s experiments can help us better understand the radiation risks for long-duration deep space human exploration.
BioSentinel will test new technology with the BioSensor payload, a kind of “living radiation detector.” At the heart of the BioSensor are the microfluidic cards that house yeast cells. As the cells get activated in space, they will sense and respond to the damage caused by space radiation. Here, a BioSentinel team member works on assembling a BioSensor payload, connecting thermal and optical units to a microfluidic card. During BioSentinel’s experiments, these components will warm the cards – and the yeast cells they house – and measure growth and activity in response to space radiation damage.
BioSentinel mechanical and structures lead Abraham Rademacher, left, integration and test lead Vaslie Manolescu, center, and electrical engineer James Milsk perform a solar array deployment and gimbal motion test on the spacecraft in a clean room at Ames. The test ensures that the spacecraft’s solar arrays will operate correctly in flight. BioSentinel’s mission builds on Ames’ history, combining the center’s strengths in space biology and CubeSat technology. Following 15 years of Ames’ experience in developing and flying CubeSats that carried and studied living microbes in low-Earth orbit, BioSentinel will be the first CubeSat to run a biology experiment in deep space.
Integration and test engineer Dan Rowan works on internal components of BioSentinel’s CubeSat in a clean room at Ames. These “spacecraft guts” include a radio, batteries, other spacecraft subsystems, and BioSentinel’s two instruments – the BioSensor payload and a radiation detection instrument. The latter measures and characterizes the radiation environment; its results will be compared to the BioSensor payload’s biological response.
Suggested Items
D Coupon Testing and Data Insights With GreenSource Fabrication
04/17/2024 | Marcy LaRont, PCB007 MagazineMarcy LaRont spoke with Steve Karas of GreenSource Fabrication at the SMTA UHDI conference in March. He presented a case study that GreenSource undertook with a customer on critical via reliability with advanced materials and used the experience to highlight the importance and effectiveness of D coupon testing. He also discussed GreenSource’s approach to data aggregation and a new system they developed to use collected data effectively.
Three Industry Leaders Receive IPC President’s Award
04/17/2024 | IPCIn recognition of their leadership and significant contributions of time and talent to IPC and the electronics industry, three IPC volunteers were presented with the IPC President’s Award at IPC APEX EXPO in Anaheim, Calif., on April 9, 2024.
Yamaha to Showcase Latest-generation Assembly Equipment and Software Tools at SMTconnect
04/16/2024 | Yamaha Robotics SMT SectionYamaha Robotics SMT Section will team with its distributor ANS Elektronik to showcase innovations for high-speed surface mount assembly at SMTconnect 2024.
TT Electronics Awarded Contract with Kongsberg Defence and Aerospace
04/11/2024 | TT ElectronicsTT Electronics, a leading provider of global manufacturing solutions and engineered technologies, announced today that its Fairford UK business has been awarded a new contract with long-standing customer Kongsberg Defence and Aerospace (Kongsberg) for the production of complex cable harness solutions.
Infineon, Amkor Deepen Partnership and Strengthen European Supply Chain for Semiconductor Solutions
04/10/2024 | InfineonInfineon Technologies AG, a leader in power systems and IoT, is strengthening its outsourced backend manufacturing footprint in Europe and announced a multi-year partnership with Amkor Technology, Inc., a leading provider of semiconductor packaging and test services.