Fujifilm Completes $88M Expansion of its Facility in Mesa, Arizona to Supply the Semiconductor Industry
April 1, 2022 | FujifilmEstimated reading time: 2 minutes
FUJIFILM Electronic Materials, U.S.A., Inc., a leading supplier of chemicals and advanced materials for the semiconductor industry with four manufacturing and R&D sites across the U.S., announced that it has completed its $88 million expansion of its electronic materials facility in Mesa. The added 80,000 sq. ft. to the existing facility includes five new buildings to expand Chemical Mechanical Polishing (CMP), high-purity solvents and process chemicals manufacturing capacity, warehousing, R&D and quality control laboratories, office space, and bulk chemical handling and storage. The expansion increases FUJIFILM Electronic Materials, U.S.A., Inc.’s manufacturing capacity by 30%, and the company plans to add 120 new positions in chemistry, engineering, manufacturing, warehousing, and maintenance, by the end of 2024.
Following construction completion in 2021, the new manufacturing operations for CMP slurries and high-purity solvents were brought online in early 2022; these chemicals are used in Fujifilm’s CMP and Formulated Products (FP) business lines to make, clean, and polish semiconductor chips.
The new FP R&D lab operations began in February 2022, which includes new state-of-the-art process tools and instrumentation to enable the development of next-generation materials for semiconductors in new consumer and electronic products. Bulk chemical storage and 40,000 sq. ft. in warehouse space was added to support expanded manufacturing of CMP and FP products. The expanded site also includes a new cafeteria and Fujifit, a free fitness center for the company’s employees with state-of-the-art work-out equipment, and classes.
“These past two years have shown us just how vital semiconductor chips are to our daily lives. We are proud that we had the foresight to expand our operations here in Mesa to support our semiconductor manufacturing customers to enable the rapid advancement of our digital society,” said Dr. Brian O’Donnelly, president and chief executive officer, FUJIFILM Electronic Materials, U.S.A., Inc., and global vice president, FUJIFILM Electronic Materials Division. “Our business is growing rapidly and with this expansion we are hiring talented and skilled employees that will help us support the evolving needs of the semiconductor and electronic materials market.”
“Fujifilm has been a corporate partner and employer in Mesa for over 25 years, and we are thrilled that they continue to invest in our city,” said Mesa Mayor John?Giles. “This expansion brings meaningful career opportunities for our residents with the chance to make an impact on the global semiconductor industry.”
For over 25 years, FUJIFILM Electronic Materials, U.S.A, Inc. has operated in Arizona, and currently has approximately 400 employees at the Mesa site. The company also has state-of-the-art manufacturing labs and facilities in Rhode Island, California, and Texas, strategically located in close proximity to its customers. To support continued growth, FUJIFILM Electronic Materials, U.S.A., Inc. is committed to continuously investing and expanding across all of its U.S. sites.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.