Global 2Q22 DRAM Revenue Grows by 6.5% QoQ
August 15, 2022 | TrendForceEstimated reading time: 2 minutes
According to TrendForce investigations, 2Q22 DRAM industry revenue reached US$25.59 billion, growing 6.5% QoQ. The primary reason for 2Q22 revenue growth stemmed from an increase in bit shipments from certain DRAM suppliers. Although PC and mobile DRAM were hit hard by inflation and weak demand, momentum in the server DRAM market remained strong in 1H22, driving quarterly shipment growth at the three top manufacturers to 5~10%.
In terms of revenue, the top manufacturers consisting of Samsung, SK Hynix, and Micron, all saw revenue growth with the two Korean companies accounting for a combined market share of 70.9%. Micron benefited from demand for servers and automobiles with its 2Q22 revenue reaching US$6.27 billion, an increase of 9.7% QoQ and highest among the three. Driven by revenue growth, each company’s operating margins moved up slightly with Samsung, SK Hynix, and Micron margins reaching 50%, 43%, and 41.5%, respectively. Looking forward to 3Q22, due to escalating manufacturer-side inventory pressure, pricing support levels have fallen significantly and growth on the shipment-side has become labored due to the impact of customer inventory adjustment. Revenue posted by Samsung, SK Hynix, and Micron is likely to decline.
In terms of production capacity planning, Samsung's wafer starts continued to increase this year, and each factory is close to full capacity. While Samsung’s new P3L plant will start contributing to the production of DRAM products early next year and give priority to DRAM products using the 1alpha nm process, significantly increasing the proportion of 1alpha nm production. SK Hynix's wafer starts also increased slightly, at campuses such as its M16 plant in South Korea and its Wuxi plant in China. However, since M10 was migrated to logic products, total wafer starts only received a marginal boost. The M16 plant still has room to expand but considering a pessimistic demand outlook, production at this plant is only expected to increase slightly in 2023. Micron has no new production capacity for overall wafer starts this year and the purpose of purchasing machinery is to maintain wafer start volume when processes advance. At the same time, Micron introduced the 1alpha nm process in 2H21 and the 1beta nm will be put into production at its Japan factory at the end of this year. After yield rate improves to a certain level, mass production at its Taiwan factory is expected in 2023. Micron is the fastest among the three major DRAM manufacturers when introducing processes.
In terms of Taiwanese factories, Nanya produces a higher proportion of Consumer DRAM. Due to the impact of lockdown policies on domestic Chinese demand, shipments declined significantly and overall revenue decreased by 14.0% QoQ. Construction of the company's new Fab5A plant has begun with a completion date of 2025. Until the new factory is completed, annual output is only expected to increase marginally. PSMC's revenue calculation is primarily for its in-house standard DRAM products and does not include its DRAM foundry business. DRAM revenue increased by approximately 21.8%, mainly due to the company's capacity allocation. As its foundry production capacity was revised down, it marginally increased its in-house production of standard DRAM, but if foundry revenue is added, a decreased of 1.0% is realized. Winbond's revenue declined slightly by 3.3%, mainly due to inventory corrections among Networking customers and a suspension of supply from TV manufacturers resulting in a decline in shipments. At present, Winbond's Kaohsiung plant will be entirely dedicated to 25S nm production and mass production of the next-generation 20nm process is expected in mid-2023, effectively driving revenue growth.
Suggested Items
Aegis Software and JUKI Extend Reseller Relationship, Marking Over 23 Years of Collaboration
04/11/2024 | Aegis SoftwareAegis Software, a global provider of Manufacturing Execution System (MES) software, announces that JUKI Automation, a world-leading provider of automated assembly products and systems and subsidiary of JUKI Corporation, has renewed their reseller relationship with Aegis Software.
Panasonic Connect to Showcase New Automated Manufacturing Solution at IPC APEX Expo 2024
04/10/2024 | Panasonic Connect North AmericaPanasonic Connect North America will showcase its smart manufacturing solutions at IPC APEX Expo 2024, including its brand new NPM-GH Pick-and-Place machine.
Minimal Initial Damage to DRAM and Foundry Production Lines Following Major Earthquake in Taiwan on April 3
04/03/2024 | TrendForceIn the wake of a 7.2-magnitude earthquake off the eastern coast of Taiwan at 7:58 AM on April 3rd, TrendForce immediately investigated the damage and operational status of various manufacturers.
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
Cogiscan Collaborates with Koh Young to Unveil How Factory Insights Software Transforms Data Into Action at IPC APEX EXPO
03/28/2024 | Koh YoungKoh Young, the industry leader in True3D measurement-based inspection solutions, is excited to announce Factory Insights, the latest offering from Cogiscan, will be demonstrated alongside KSMART in Koh Young booth 2112 during IPC APEX Expo.