X-ray Imaging Reveals Secrets In Battery Materials
June 19, 2015 | UC San DiegoEstimated reading time: 5 minutes
In a new study, researchers explain why one particular cathode material works well at high voltages, while most other cathodes do not. The insights, published in the 19 June issue of the journal Science, could help battery developers design rechargeable lithium-ion batteries that operate at higher voltages.
Researchers used a powerful X-ray imaging technique combined with new data analysis algorithms to gain insights — at the nanoscale level — on the mechanical properties of a cathode material called an LNMO spinel (composed of lithium, nickel, manganese and oxygen atoms). The study reveals how the cathode material behaves while the battery charges and offers a possible explanation for why this particular cathode material works well at high voltage levels, an attribute that is crucial for batteries used in high-power applications such as electric cars.
X-ray imaging defects inside battery nanoparticles
In addition, the imaging and data analysis techniques described in this study provide new strategies for discovering how other cathode materials behave at the nanoscale level while batteries are charging.
The multi-institution team is led by physicists and nanoengineers at the University of California, San Diego. X-ray imaging experiments were performed at Argonne National Laboratory’s Advanced Photon Source.
“Understanding why this cathode material works well at high voltage can help us understand how to make other battery materials also work better at high voltages,” said Andrew Ulvestad, the first author of the Science paper. He did this research as part of his physics Ph.D. work at UC San Diego.
While the cathode materials in most of today’s lithium-ion batteries operate at 4.2 Volts maximum, the LNMO spinel is robust at higher voltages. It functions at up to 4.9 Volts. Reasons for why this material performs well at high voltages have remained a mystery. The team has now offered an answer to this question. Through imaging and data analysis techniques, they identified and located defects within the cathode material. The defects are irregularities in the material’s otherwise highly ordered atomic structure.
Using Argonne National Laboratory’s Advanced Photon Source, the team imaged the cathode material while it was inside a charging lithium-ion battery. Analyses of the images revealed that the defects are stationary when the battery is at rest. But when the battery is charged to high voltage, the defects move around within the cathode material. The researchers report that this is a significant finding because it shows that the material has a unique way of responding to the strain that is induced at high voltage.
“Materials typically respond to strain by cracking. Our experiments show that this material handles strain by moving the defects around while the battery is charging,” said Shirley Meng, nanoengineering professor in the UC San Diego Jacobs School of Engineering and a corresponding author on the study. “From the perspective of a battery materials researcher, this study also points to the exciting possibility of ‘defect engineering’ for battery materials. This would involve designing new battery materials that have specific ‘defects’ that improve performance.”
Watching nanoscale defects move in real time
“Defects have a bad reputation due to our constant drive towards perfection,” said Oleg Shpyrko, physics professor at UC San Diego and a corresponding author on the study. “But can we use a defect-engineering approach to design and create new types of materials, or perhaps to enhance the desirable properties of the existing ones? Our research shows that the defects can be directed, or even choreographed, by simply running an electric current through the material.”
The breakthroughs in this research came from analyzing data from an imaging technique called Bragg coherent diffractive imaging.
The method uses laser-like X-ray beams and novel computer algorithms to reconstruct high-resolution 3D images of nano-scale structures, such as the LNMO spinel described in this study.
Defects are difficult to image directly because they are extremely small — less than a nanometer in size. However, each defect causes a strain field, which is an area of deformation surrounding the defect in the atomic structure. The strain fields are much larger — tens of nanometers in size — making them large enough to be imaged. By analyzing the strain fields in the LNMO spinel, the team mapped out the defects and studied how they play a role in the material’s performance at high voltage.
“These new imaging methods that allow us to look inside the battery — while it is operating in real time — will be important not only for energy storage materials, but also for many other applications, novel materials and devices,” said Shpyrko. “Thanks to our combined efforts, we have developed the suite of tools that can help unravel the complexities of atomic-scale defects, which are commonly associated with performance degradation, but can also potentially be used to control or optimize the material’s properties.”
“It’s important to see the defects and know where they are in order to understand how they might change the properties of the material,” said Ulvestad. “We are the first to do this imaging in a working battery.”
Negative Poisson’s Ratio
The team used the defects to probe the mechanical properties of the LNMO spinel. The researchers report that the movement of the defects while the battery is charging causes changes in the strain fields, which are described by mathematical equations. Using these equations, the team calculated a material property called the Poisson’s ratio and discovered that this value is negative when the material is charged to higher voltages.
Negative Poisson’s ratio: a rare find in battery materials
The Poisson’s ratio expresses how a material behaves under an applied strain. Most materials have a positive Poisson’s ratio. This means when a material is enlarged in one dimension, it shrinks in the other two dimensions, and vice versa. For example, stretching a rubber band in one dimension makes it thinner in the other dimensions, while pressing down on a ball in the vertical dimension makes it expand in the horizontal dimensions.
Materials with a negative Poisson’s ratio behave the opposite under an applied strain. If a rubber band had a negative Poisson’s ratio, stretching it in one dimension would make it fatter (instead of thinner) in the other dimensions. Materials that behave this way are rare.
A negative Poisson’s ratio has important applications for lithium-ion battery materials. It enables materials to maintain their shape regardless of what type of strain is applied, making them more tolerant to strain.
“The LNMO spinel is incredibly strong. You can expand it or shrink it, and it doesn’t crack. No one has ever reported a negative Poisson’s ratio in battery materials. We hypothesize that this property helps make this cathode material more resistant to strain than other materials at high voltages,” said Meng.
Suggested Items
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.